Announcement

Collapse
No announcement yet.

work stuff

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • srl_welder
    started a topic

    gland bolt up build up

    gland bolt up build up
  • srl_welder
    started a topic

    a used and abused cylinder piston and bolts ripped off the rod.

    a used and abused cylinder piston and bolts ripped off the rod.
  • srl_welder
    started a topic

    plug welds

    plug welds
  • srl_welder
    started a topic

    trunin pin crack air arc

    trunin pin crack air arc
  • srl_welder
    started a topic

    turning the weld and tube

    turning the weld and tube
  • srl_welder
    started a topic

    those were 1.250" bolts!

    those were 1.250" bolts!
  • srl_welder
    started a topic

    chcuking tabs welded on 12.500" diameter waiting for turning and plating

    chcuking tabs welded on 12.500" diameter waiting for turning and plating
  • srl_welder
    started a topic

    bore had to be bored out to 21.and change?" ha ha

    bore had to be bored out to 21.and change?" ha ha
  • srl_welder
    started a topic

    done welding

    done welding
  • srl_welder
    started a topic

    during welding of bore

    during welding of bore
  • srl_welder
    started a topic

    the rig in use (picture should be rotated 90* right)

    the rig in use (picture should be rotated 90* right)
  • srl_welder
    started a topic

    setup for welding a bore

    setup for welding a bore
  • srl_welder
    started a topic

    here is the old cracked eye

    here is the old cracked eye
  • srl_welder
    started a topic

    same kind of rod, took a unbent rod and welded it to an uncracked eye just to give you an idea that rod is 11" in diameter

    same kind of rod, took a unbent rod and welded it to an uncracked eye just to give you an idea that rod is 11" in diameter
  • srl_welder
    started a topic

    bore cut to size

    bore cut to size
Working...
X