Announcement

Collapse
No announcement yet.

3035 Spoolgun tip upgrade to standard M-15 gun tips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • aametalmaster
    started a topic

    Spoolgun barrel will be drilled for 1/4-28 for a standard M-15 Miller mig gun tip. These bigger tips let the spoolgun weld so much better than the stock small hard to get tip plus they are cheaper to buy. If anyone wants theirs converted just give me a yell.

    Spoolgun barrel will be drilled for 1/4-28 for a standard M-15 Miller mig gun tip. These bigger tips let the spoolgun weld so much better than the stock small hard to get tip plus they are cheaper to buy. If anyone wants theirs converted just give me a yell.
  • aametalmaster
    started a topic

    Lathe drilling for 1/4-28 tap. Trim about 1/16" off barrel end because the new tips are a tad longer.

    Lathe drilling for 1/4-28 tap. Trim about 1/16" off barrel end because the new tips are a tad longer.
  • aametalmaster
    started a topic

    Lathe tapping 1/4-28 to get it straight.

    Lathe tapping 1/4-28 to get it straight.
  • aametalmaster
    started a topic

    New bigger tip in barrel for test fit.

    New bigger tip in barrel for test fit.
  • aametalmaster
    started a topic

    Close up of new standard mig tip in barrel.

    Close up of new standard mig tip in barrel.

  • 3035 Spoolgun tip upgrade to standard M-15 gun tips

Working...
X