Generators

[Walk_The_Cup399]

As of right now Im running a dynasty 200 dx. I use it for small projects using stick and tig, around 155 amp. It runs off 110 but none of the outlets in my townhouse can handle it. So the easy route would be to run a dedicated outlet/breaker for my machine but I rent and have been told by tge wife that...

[dhays]

I'm looking to do a few outdoor projects and I'd like them to look good and be maintanance free for years! I'd really like to have a bare metal finish and not have to deal with clear coating or powder coating, however, as I read more and more into different materials, I'm not sure this is a realistic...

[niftyweld]

Here's one of them, is this any good with 140ST?

This is what I've found that caught my attention 5pc for 10 basically... https://www.weldingcity.com/tig-tung...-2.4mm-x7.html

For filler metal 3/32"...

[solidstate]

Three compartment 16 ga. 430 stainless steel scullery sink. The right compartment is filled with a 1:32 bleach solution for disinfecting animal bowls. The weld at the bottom of the divider between the center and right compartment is cracking and water leaks between compartments.

What repair...

[Brytawney]

Ooo

[chance_hogelie]

Hey everyone! I'm new here and I've been welding for about 6 years now. I obtained my Alberta pressure ticket this past October and the shop I'm working for are upgrading all the pressure welders tickets. The next one to tackle is stainless pressure. The root is rolled MIG hard wire 316 I believe,...

[Miller # 1]

Needing welders for pulse mig operations. This is a shutdown job for 6 weeks. If anyone is interested contact me for more information.

[Miller # 1]

Experienced mig (gmaw-p) welder needed for contract. Must have certs, pass drug screen and have own transportation. Anyone interested contact me for details.

[lw3eov]

Hello,

Please explain me how to do oxy-acetylene welding of stainless steel, I used the right flux which is only for it, but I couldn't do it, where I applied the torch it looks like coal.

Thanks
Regards

Marcelo

[Rick Eis]

I am looking for a detailed basic chart of settings for the Dynasty 200dx

More specifically, I am looking for 6 detailed settings for three metals (two thicknesses for each metal); aluminum (1/16" and 1/8"), stainless (1/16" and 1/8") and plain mild steel (1/16"...

[fortyonethirty]

Has anyone here used a cermet tipped blade in a dry cut chop saw?

I've got lots of 316 stainless to cut and the carbide blades don't make more than 10-20 cuts. I'm hoping cermet might do the trick.

[elektro]

Hey guys what advice can you offer on cutting 40mm stainless steel. My friend got a contract where he has to cut 40mm steel plates and he's planning to purchase a plasma cutter for that purpose.

I've gathered some info about plasma cutters and saw some options:
a) A korea made...