Hi all! I am new to this and have been reading all the helpful advise you all had to offer for a while now.
So I just bought a second Trailblazer 302 G w/ Kohler (Manual says its a July 2005 model) that did not start for $650. I spent some with it and got it to run however this is when...
6 results in 0.0041 seconds.
-
Miller Trailblazer 302 G Kohler Low Hz from generator
-
12vs problems
Hello everyone, I'm new to the forum and hoping that you guys are willing to help me with my issues. I have a 12vs that I'm running of a trailblazer 302 and cant get it to maintain an arc. I'm using .045 solid wire with 75/25 at it suggested setting and the wire wont arc, it turn red hot, breaks off... -
12vs problems
Hello everyone, I'm new to the forum and hoping that you guys are willing to help me with my issues. I have a 12vs that I'm running of a trailblazer 302 and cant get it to maintain an arc. I'm using .045 solid wire with 75/25 at it suggested setting and the wire wont arc, it turn red hot, breaks off... -
millermatic 250x problems
I have a millermatic 250x mig welder I purchased several years back, new. Having problems with the output voltage suddenly raising very high while welding.. normally have it set around 19-20v but spikes really high causing a huge arc.. I voltmeter tested the output of +26v with load (arc) and higher... -
Syncrowave 200 control problems
I have a 5 year old Syncrowave 200, and over the last year and a half I've experience intermittent to now permanent malfunctions. Earlier (after warranty expired) I got the Help-11 screen, and I traced that down to 'tin whisker' problems whereby I fixed it by running a heat gun over the board. I did... -
Hi Everybody!
Regards! Today my classmates were proposing to investigate about de environmental problems when you're using the "Dialarc 250/250P AC/DC", or another kind of machine AC/DC, i hope you'll help me, i'm gonna check the forum every day,
I'm waiting for your answers! 