11 results in 0.0142 seconds.
-
Trailblazer trouble shooting.
Hello, I posted up a little while ago about a trailblazer 250g that I was looking at. I bought it today for $200. It has the Onan performer 20 engine on it. Runs great, high low idle both work. But the machine makes no power to the outlets or leads. He said it was a bad armature ( I don’t believe... -
What's this old welder worth?
I picked up this older welder a while back. It is a Miller Del-200 with a Deutz single cylinder diesel engine. Motor is F1L 210D. Serial number is 7652864. I tested the generator and it produced power.
I cannot attach larger picts. Here is a link to Google drive with the picts of the unit.... -
Generators
As of right now Im running a dynasty 200 dx. I use it for small projects using stick and tig, around 155 amp. It runs off 110 but none of the outlets in my townhouse can handle it. So the easy route would be to run a dedicated outlet/breaker for my machine but I rent and have been told by tge wife that... -
Trailblazer 44d no arc
Looking at buying a trailblazer 44d off of a guy but went to look at the machine and it had appropriate power to all the outlets but nothing (no voltage reading st all) at the output post for the torch. Thought i was going to get a good deal but i dont want to buy a money pit. Any ideas on what this... -
Trailblazer 44d no arc
Looking at buying a trailblazer 44d off of a guy but went to look at the machine and it had appropriate power to all the outlets but nothing (no voltage reading st all) at the output post for the torch. Thought i was going to get a good deal but i dont want to buy a money pit. Any ideas on what this... -
Generator or Engine Driven Welder/generator?
Hi, I'm new to the welding forum. We have a small fabrication shop in northern Colorado. We are a job shop and will build anything that comes our way but are limited by our small shop space (<1000 Ft2).
We work about 50% of the time in our shop and 50% on site using a Millermatic... -
Power from large generator to the Millermatic 211
Posting for my husband so I may not have the right terminology for the question, but I hope you can help.
My husband wants to power the 220V side of our new Millermatic 211 from our large generator. The generator has more than enough power, but the 30A plug 220V receptacle on the generator... -
Weird Miller Air Pak welding machine problem!
I recently purchased a 1988 Miller Air Pak 400amp welder from a government surplus auction and it has me stumped. The unit has the Deutz FL4912 diesel motor, which runs perfect. The problem comes from the generator side of the unit. When I fire it up, the unit produces 110v power but not 240v. Also,... -
GX200 2+4 Red-D-Arc & "Dirty AC"
Just bought this machine. It was used for 130hours over the past 6or7 years. I am just curious if anyone has this little guy and knows anything about it. I was told that it's ac outputs are good for 4000W of power and give off "Dirty AC".... meaning fluctuating power that will burn out... -
Help needed for AirCo Welder/generator w/ Kohler Engine
We purchased an AirCo welder/generator with a Kohler Engine. We are looking for manuals and parts to include consumables. Pictures can be provided if neccessary. All data plate information that is legible is listed below. Any information you can provide is greatly appreciated. Thank you.
... -
welding truck
im having a hard time finding the right group of poeple to advertise to, any sugestions? i've had it on ebay and no luck. its a really clean truck and very nice expecially for a welding truck. i have tons of pics and a huge write up about it, i just can't seem to find people looking for a welding truck....
