Miller spoolmatic 1 and wc1 to a millermatic35?

[D Auger]

Looking nice so far !What t case and trans are you using I know it’s been a while ?
D

[D Auger]

Looking to hook a miller spoolmatic 1 on my miller 35 do I need to use the wc1 controller on it to make it work on the the 35 ?If so I have a wc1 to use.
I got this setup so I can do some aluminum off my 35 ,the other plug on the wc1 on the back opposite the 115v plug I believe is the contractor...

[D Auger]

I would post the serial numbers and models one at a time so one of the techs can trouble shoot with you .
Are you handy with a multimeter also good charged battery's are very important oil level also?
Check the slip rings cleanup corrosion on them with 300 grit paper make sure the brushes...

[D Auger]

Try posting in the welding discussion forum I'm sure one of the techs can help you out further.

[D Auger]

5/16 3/4 inch length worked with a lock washer

[D Auger]

Thanks Duane for your help

[D Auger]

Nice job! those holes cut on the inside wear plate of the floor did you plug weld those ?
looks like A Deere John bucket

[D Auger]

I recently bought a trailblazer 250 g as a project I was going over it today and the bolts are missing that go through the fan to the engine drive plate.
Does anyone know what size and length they are ?
Also what would be a good wire feed setup to run off this machine ?Serial # is JJ33

[D Auger]

Getting same thing ?

[D Auger]

It is prob worth the money to call them at this point ?
Or Going by the old style miller graphics could be a 70s machine ?
Your serial # starts with 73 try a 73 manual and compare it to yours and your layout ,inside your machine.

[D Auger]

Try calling miller tech support with they will also need your serial #.

[D Auger]

What process and what wire or electrode are you running on that repair ?

[D Auger]

I have one it's a beast I love it does awesome on stick and just learning tig on it has more then enough power they go all the way to 310 amps .
I like the old stuff as well transformer machines last a long time also no boards in this beast try it out don't think you'll be disappointed price seems...

[D Auger]

You can download the manual from this site should be a set of hf points in there once you hit the right switches like Ryan said it should light up .
Any pics and the model name will help

[D Auger]

Do you have any wire speed at all ?Did you clean the back of the wire speed rheostat with some fine sand paper ?
Also check the wiper on the rheostat that also can get corroded make sure all your coonectons are clean no corrosion I'm not a welder tech but know a little about them .Hopefully one...