Miller Dialarc HF needs to be up near 185 amps for 1/8" E7018 H4R

[Raf]

Miller Dialarc HF needs to be up near 185 amps for 1/8" E7018 mr


Thank You cruizer,
I am sure you are correct about the village not willing to spend on a line upgrade.
It is a relief, knowing that even if the village did upgrade, no damage would be done. ...

[Raf]

Miller dialarc HF needs to be up near 185 amps for 1/8" E7018 H4R


Thank You very much, Cruizer,
211v under no load, changing the jumpers did it.
Welded again today, and a big difference, the electrode holder stayed comfortable, instead of really hot.
...

[Raf]

Miller Dialarc HF needs to be st to 185 amps to burn 1/8" E7018 H4R lincln excalibr.


Noticed a difference right away.
We changed the jumper placement to 208, and we only needed to go up as high as 84% of the medium setting, in the equation for the exact number of...

[Raf]

Miller Dialarc HF NEEDS TO BE UP NEAR 185 amps for E7018 H4R


Hi guys,
I am a beginner, and confused that two different techs, the latter one being Adrian, and he said the opposite of the first tech.
Leave the jumpers at 230v because there is 10% range for 230v. He...

[Raf]

Miller dialarc power problems


Thanks again,
spoke to village inspector of electric and he said the voltage varies between 212 and 237 and miller tech i spoke to a secound time, suggested that I keep jumpers set for 230v.
10% of 230 is 23 v that is the range for 230v,...

[Raf]

Miller Dialarc 250 HF BURNING E7018 at 185 amps

Will try changing jumper configuration, to 208v. Hopefully this will fix the problem thanks,
Raf

[Raf]

Miller Dialarc needs 185 amps to burn1/8" e7018 h4r


thanks for the help to you both.
Serial # HH091770
the plate says (208v), 230v, 460v
200v,
this is as appears on plate. So the middle position of 230v, that is where the...

[Raf]

Miller dialarc needs 185 amps to burn 1/8" e 7018 4HR


Was tested at entry of disconnect line , under no load.
will have someone who knows more than I test it.
Just do not know much about electrical.
Thanks
RAf...

[Raf]

Just got a used dialarc, Seems a bit underpowered, that is what my buddy says, who welds. I have only burned electrodes two times for about an hour each time.
On DCEP , jumpers set to middle position for 230v, medium power, and started at 50% and would not lite until up at 94%, of 190amps is...

[Raf]

Dial arc 1978


Does the dialarc have veriable frequency?
thanks,
raf...

[Raf]

1978 dialarc hf question?


Sounds like it will be a great first machine.
How is the arc differ between the dialarc and the Dynasty 280DX?
Raf...

[Raf]

Just got a nice rig with tig attachments and cooler, pump, foot pedals, argon tank, cups , and plenty of red box thoriated tungstan.
The manual is for a august 1991, effective with serial no. Hf862825
the picture on the cover has two handles on the left and different looking dial. ...

[Raf]

Does a thunderbolt have thermal protection

Thank You for your advice
raf

[Raf]

Thinking of getting my first stick welder, but this model does not seem to have any overload protection.
I do not want to inadvertantly overheat the welder.
Thanks in advance for any advice.

Raf

[Raf]

What is meant by a nice arc?


Which has the nicer arc for stickwelding, the synchrowave or the dial arc?
thanks,
Raf...