Welding tips and tricks .com

[GARAGEGADGETS]

Phase Converter

Have you check to see if the pump motor is rotation is correct? With 3 phase it is very easy to have your motor turning the wrong direction.

[GARAGEGADGETS]

Impact Gun

If your in the market for one ToolTopia has good prices.

[GARAGEGADGETS]

Shop air lines

Been using 1" sch40 PVC for over 20+ years, no rust and very little condension. Every connection ls glued. I put a saddle strap where quick disconnects are installed and running 175 psi of air pressure with no problems.

[GARAGEGADGETS]

Storage Container

You might think about painting the roof with mobile home asphalt base paint. Those boxes have a tendency to rust through on the roof if it is not being moved for long periods because water lays in the channels.

[GARAGEGADGETS]

Foot Pedal

Why not call Miller and talk to the Tech Department.

[GARAGEGADGETS]

Wire storage

Release the tension on drive rollers and roll wire back on spool. Then store the spool in zip lock bag to keep it from rusting.

[GARAGEGADGETS]

Fittings

Western makes the fittings. Your local welding supply should be able to get them, they are replacement nipples that attachs your regulator to bottle. I have been fill my small bottles for years with no problem. Just cannot fill acelylene.

[GARAGEGADGETS]

Bender

I see electrians bend aluminum conduit all the time with a Greenlee Conduit bender with no kanks.

[GARAGEGADGETS]

Comparison

Go to weldingtipsandtricks.com and Jody does a review and comparison on the Everlast welders.

[GARAGEGADGETS]

Insurance

I had my garage and its contents insured by my homeowners seperate from my house.

[GARAGEGADGETS]

I ran across this welding website the other day and found it to be one of the most helpful web sites when it comes to welding. I have looked at alot of web sites and this is one of the best. It covers all phases of welding,explains and answers alot of questions. Also does machine comparisions and has...

[GARAGEGADGETS]

Engine won't start

You can go to opeengines.com and download the manual for that engine or look at the parts breakdown for free, they are a online kolher dealer.

[GARAGEGADGETS]

Picket Twister

I made one using a old pipe threading machine. It is set on a bench I made with a adjustable tail stock,so I can make different lenght pickets. It will twist 1/2 to 3/4 solid square stock like butter. It takes less than 30 seconds to twist a 40" picket. Turn it on...

[GARAGEGADGETS]

Miller is having a price increase in June. I was told it was going to be about 2 1/2%. They are also coming out with a Dynasty 250 this year.

[GARAGEGADGETS]

Call Bob at B&R Welder 301 870-3252 he can tell you how it can be done. He is working on puting kits together to do what you are asking.