Recall on Spectrum 375 & 625 X-treme's

[brwelder]

Shipping cost



The $ 345 is for the second day air for 86.6 lbs and insurance for $ 1200
UPS has never been very careful with heavier machines . we pack sealed air - instapacks in all mm 140, 180 & 211 to minimize damages before we ship .most dealers do not...

[brwelder]

call 301-399-4742--Bob at B & R Welder still has some...

[brwelder]

Millerweldersales

Millerweldersales is BRweldingsupplies...

[brwelder]

plasma recall

Machines we have sold as follows:
Spectrum 375 X-TREME

Stock#: 907529

Serial#: MC011009P

MC011010P

MC011016P

MC060162P

MC060171P

MC060173P

MC060205P...

[brwelder]

Please be aware that Miller has informed us of a possible problem with several plasma units recently sold and shipped to Miller sales centers.
Please check the following:
MODEL 375 X-TREME STOCK#907529 SN#MC010947P-MC070255P
MODEL" "SN# 907529001 SN#MC010532P
MODEL...

[brwelder]

UPS damage - the truth

I will be glad to post the information that was filled out by you(Cori), in which
you did in fact place down the wrong address. So if you got a machine by someone
else, that fine, you got a machine and can weld. For you to keep going on about
...

[brwelder]

UPS damage - the truth

I will be glad to post the information that was filled out by you(Cori), in which
you did in fact place down the wrong address. So if you got a machine by someone
else, that fine, you got a machine and can weld. For you to keep going on about
...

[brwelder]

response to Cory151

In response to Cory151 .
When Cory filled out the web order, he did not supply the right address. We shipped to the address provided in the order, and found out through UPS, that
it was not a correct address. After calling Cory, he relayed the right...

[brwelder]

BetaMig 2510

The BetaMig 2510 uses a M-25 gun which has the same brass end as a Spoolmate 100 . The switch kit 300409 is used to add the two wires and pins to the 4 pin trigger plug . And to splice into the wires gouing to the drive motor for power to the switch and to add power to the...

[brwelder]

spoolmate 100 on millermatic 135



You can hook up the spoolmate 100 and a miller 300409 switch kit . If your
Serial# is LC175022 and above ( with the 2 pin square drive motor plugs)
the switch plugs into the harness . If it is a lower serial number ,...

[brwelder]

millermatic 172



the spoolmate 100 and the 300409 kit will work
you will have to do some rewiring as the plugs on the switch will not match up with your drive motor plugs
http://www.brweldingsupplies.com/par...m?category_id=...

[brwelder]

spoolmate 100 on millermatic 135/175

the spoolmate 100 will work on the millermatic 135 & millermatic 175 after serial#
LC175022 ( with the 2 pin square drive motor plugs)
a installation kit is required.
we are also working on a kit for the handler 135, 140,...

[brwelder]

Miller Spectrum 375 X-treme prices


we currently have the Spectrum 375 X-treme with case for $ 1135

http://www.brweldingsupplies.com/par...product_id=414...

[brwelder]

Welder Tue Up KIts


Miller has tune up kits for Kohler, Robin, Kubota and Onan engines on their welders these come with the plugs,fuel filter, air filter and pre filter and oil filters . We carry them all at



http://www.brweldingsupplies.com/pa...

[brwelder]

MIller Dynasty 350 Tig Runnner

We have sold a few of the new Dynasty 350's and 350 Tig Runners
and the customers have been very satisfied with the quality and performance or these units. Miller has called some of the customers for input and is very concerned about customer feedback...