Have the Horbat Ironman 230 welder, it came with argon mix regulator/flow gauge.
Do I really need a different regulator to use straight C02 gas?
If I do any recommendations as to which one to purchase?
9 results in 0.0059 seconds.
-
Do I need a different gas regulator when using straight C02?
-
Is the wire 70S6 wire equal to 7018 stick rod? Or ?... -
which wire to use .030 or .035 second part to question What type
Thank you for all the replies to the question.
Another part of it:
What wire type I mean; for stick welding I use 7018 rod for equipment welding it's a strong weld.
I wonder what is the number of MIG wire to use for strong welds that's equivalent to 7018 rod? -
Any reply to my other questions in the post.
It is my understanding from reading these posts that either .030 or .035 will work just fine. Hardly any difference in results correct?
What about grinding the edge off the steel tube before welding?
Gas 75/25 or 100% CO2 is...Leave a comment:
-
I thought I wrote 1/4 inch .25 inch, did not catch it when a reviewed my post,
would like a lot of information on my questions.
Thank you for your time and information...Leave a comment:
-
which wire to use .030 or .035
New to MIG welding.
And I am not a professional welder, weld only when I have to on my heavy earth moving equipment.
Will be welding .025 steel tubing together, with Ironman 230 welder.
Is it best to grind the edges so there is say 1/16 gap on the edge of the tube being welded to the... -
purchasing an Horbart ironman 230 welder.
Will be using it to weld, new from a steel warehouse, 3 inch square tubing with 1/4 thick wall.
With the new welder what do you think I should use; flux wire or regular wire?
Also will be welding 1/8 thick plate to the tubing and some 1/4 inch thick plate to the tubing.
Since Miller... -
Need wire that is compariable to 7018 stick rod and which gas to use with it?
Need to weld thicker steel on bucket edges.
Have used 7018 stick rod, want to try Mig welding it what wire is similar to 7018?
Can I use straight CO2 gas and not Argon CO2 mix gas with the strong wire?
Will the results with straight CO2 gas be the same as with the Argon/CO2 gas that... -
purchasing first mig welder looking at Miller 211 or 212 or 212 Help Comments Request
I am looking for input on which Miller Mig welder would be best for my operation usage.
After reading about the various Mig welders available I have decided on three options, all Miller Mig welders the 212 or 212 or 252.
I weld mostly 1/4 inch and under steel with a some time event of 3/8...
Leave a comment: