stainless & mild steel welding

[eecervantes83]

211✓

[eecervantes83]

14ga SS Welded to 14ga. MS . Panels would it be safe to weld. With just. C25. And mild steel mig wire. To keep cost of consumable down.

[eecervantes83]

Do you mean stringers vs weave welds?

[eecervantes83]

I think I seen rolls at home depot in the electrical isle . Maybe 10ftlong ?

[eecervantes83]

Im thinking mobile inside the shop with wheels. If thats not the case . He should just buy a folding table like the ones sold by miller.

[eecervantes83]

Me personally would use a minimal of .095. that table with a 1/4" -3/8" top is what I would do.
And easily handle 500#

[eecervantes83]

Most aluminum alloys are readily weldable using GTAW or GMAW. However, some are not. Let's take a quick look at the common families of aluminum alloys and their weldability characteristics:

1XXX alloys. Essentially pure aluminum (99 percent pure) and used to carry electrical current or...

[eecervantes83]

Effects of Composition and Microstructure on Corrosion
1xxx Wrought Alloys. Wrought aluminums of the 1xxx series conform to composition specifications that set maximum individual, combined, and total contents for several elements present as natural impurities in the smelter - grade or refined...

[eecervantes83]

The pickup tube acts the Same as a fountain drink straw when it cracks half way and u begin sucking up air. Pull out the hose and replace the section of tubing .

[eecervantes83]

Pipe size and whick wire are are you using? And shade 10 is sufficient.

[eecervantes83]

I guess we did I just got a chance to weld some aluminum today . Got it all figured out if some one else need some quick set up setting I wrote some down after hrs of figuring out the parameters. I like being able to fiddle with all the setting but its also a chore I haven't set up a dedicated station...

[eecervantes83]

Im having trouble setting up to tig aluminum for some reason all the parameters seem backward upside down and I cant put down a decent weld yet. Im using 2% lathanaded. 3/32" at 150amps. What are some starter setting on this machine ?

[eecervantes83]

The quality of the jeans has gone to ****. I bought 4 pairs 4 months ago. And their all ripped up with holes in the crotch area and the stitching coming apart. What's a good other brand to buy . Im a field welder so in in all types of positions and like the b01 style carhartt was putting out. For...

[eecervantes83]

It. Will work I've done it a few times

[eecervantes83]

Find out who stocks the large weld shops in your area they usually sell to the public for cheap .