Search Result

[uhohjim]

Where are you located?........would be alot easier recommending someone if everyone knew your location. Jim...

[uhohjim]

I've got an Evolution Raptor dry cut saw........had it for over 2 years now ....still on the original blade that came with it...........and I've had a ton of material through it from 4x4 1/4 wall on down without any noticeable dropoff in the blades cutting ability.. Jim

[uhohjim]

I was in Vegas a few weeks back..........the Cannon was still in the showroom..Jim...

[uhohjim]

Awesome Idea......always having problems with lack of light once you're in position to weld......great Idea......maybe even a retrofit for older elite helmets...

[uhohjim]

Nocheepgas pretty much hit it right on the head..........I have a dedicated 110 welder just for sheetmetal setup with .023 wire .......it never gets touched.....it's dialed in .Gor for good fit for your panel....I like to fit oversize.........,cleco in place then trim the body to fit the patch and weld...

[uhohjim]

Cool project.Very creative.......I didn't read the whole article at first and was thinking you had one helluva Big wood lathe to turn that sucker.....LOL....Flap discs are definitely awesome for shaping ALL kinds of stuff.....Again Nice Work..Jim

[uhohjim]

That's what I call a quick response.......hope you guys get it dialed in

[uhohjim]

[QUOTE=davinci2010;243812]Depends on how you were taught. I've never had good luck at preventing oil canning with the heat and quench method. That's what the hammer and dolly work afterward is for. The guy that taught me really did not put too much heat in the panel. I even saw him park a car in the...

[uhohjim]

I guess the general consensus is the "shrinking" hammers with the pattern just mess up the panel and don't work?


The shrinking hammers work good if you are trying to cold shrink a panelI have a couple I use quite often and you can move alot of metal around with them...

[uhohjim]

Yeah, on the internet, some will really stick their chest out on you & try to get a reaction. Of course, that's only because nobody ever gets their jaw broke because of their big mouth in cyberspace.........

LOLAin't that the truth...Jim

[uhohjim]

HI GUSB do you have access from the backside ?? Heat shrinking with a torch would be the way to go.Shrinking disc works well also but it helps if you have access so you can hammer and dolly before quenching with a cool rag.....Even with hammer dolly access heat and a cool water soaked rag will take...

[uhohjim]

Your table looks like it turned out beautifully...and what you call dumb good luck is now called experience lol.......Jim

[uhohjim]

Like rvpc said.that thing is a work of art.are you going to paint or powder coat??Either way it's gonna be a bad dude when done.NICE WORK...Jim

[uhohjim]

You got a helluva deal on the Powermax...I have a powermax 30 and I love it.....cuts like a hot knife through butter..jim

[uhohjim]

Were yous weating while you were welding???Got zapped by my lincoln 300/300 a few times on hot sweaty days........definitely a wake up call to change jackets ,gloves and anything else soaked with sweat.Jim