Search Result

[Meltedmetal]

My concern with vinyl would be that the sparks will melt into it. It will of course depend on how close you are to the screen when you are grinding. I've set things on fire with grinding sparks.There are vinyl welding screens but I don't know how well they stand up to sparks or how flexible they will...

[Meltedmetal]

I have a couple that are 16 ga.. steel they seem to work okay for me.

---Meltedmetal

[Meltedmetal]

It might be my imagination but that spool looks badly wound. Is the wire crossing over itself on the spool?

[Meltedmetal]

The shelf is nice in that it is easy to sweep under and there is nothing to obstruct your feet while you grind. Just be sure not to set your wall on fire. The pedestal is nice in that you can move it to another location if you so desire. The pedestal must be stable(I don't think the one in the video...

[Meltedmetal]

Most likely gray iron. I have a few of them that were brazed years ago. Still going okay. Takes a reasonable amount of heat and bronze rod though.
---Meltedmetal

[Meltedmetal]

Check Digikey and other part suppliers. The list in the first link shows how many they have in stock of each item.
https://www.digikey.com/en/products/...AFcAToRABfUvAD...

[Meltedmetal]

I don't know what is happening in your computer but when I click on the link it brings up the manual for the OTC Turbo Pulse 350 DF/500DF. at manualslib.com. Who knows? Anyway the e-bay sale appears to be for only a remote control pendant for the OTC Turbo Pulse 500DF. At $150 I think you'd be disappointed...

[Meltedmetal]

I agree with aametalmaster. You can see what the equipment it is for here https://www.manualslib.com/manual/17...50.html#manual

[Meltedmetal]

Maybe something like these?
https://www.amazon.ca/MG-Chemicals-S...mt=&hvdev=c&am...

[Meltedmetal]

If you're going to build a bunch of these make yourself some jigs to hold the parts in alignment and as Ryan said, use/build clamps to hold things where you want them. Proper jigs can be spendy to build in $'s and /or time.

[Meltedmetal]

The failure was definitely in the welds but the cause, In my opinion, was the slider was too short. and/or may have been too tight and allowed it to bind on the guide plate and tip the slide slightly, sticking it to the beam. I don't see galling on the bottom of the slide so I would guess that it happened...

[Meltedmetal]

https://www.millerwelds.com/support/manuals-and-parts

You should be able to find some info here. Try searching there by serial # first.

---Meltedmetal

[Meltedmetal]

Spoolgun?

[Meltedmetal]

This thread is more than 10 years old but if you look at his profile you'll see that he is located in Edmonton, Alberta and his company's name is Weld Alert. If you google it and the location the Yellow Pages will get you a phone number.
https://forum.millerwelds.com/member/6989-cruizer/about...

[Meltedmetal]

You could also add a grapple to it to keep the stuff from falling off.
https://www.faverinc.com/?/
https://www.mycnhistore.com/us/en/ca...ent/p/87677285