Search Result

[GONWHLN]

http://www.kenneke.com/energyplans.html this site is one of many on the net.just search alternate energy,DIY generator,ETC. good luck Don

[GONWHLN]

Oh, and don`t forget the other great inventions,ejector seats for helicopters,and screen doors for submarines.

[GONWHLN]

Just remember if it wasn`t for Thomas Edison we would have to watch TV in the dark.

[GONWHLN]

Never been caught talking to anything ,but I did get caught physically abusing a pin out of a man lift arm with a 10 lb. hammer that turned into torcher by a victor wrench. After a cooling off period were back together again giving me the lift I need.

[GONWHLN]

plastic welding rod is available at harbor frieght, so watch for flying pigs....

[GONWHLN]

one more thing ,Kevin was right ,230/460
tag on front of machine confermed that .Machine jumpered for 460.
Thanks again guys I truely appriciate the info. Don

[GONWHLN]

all better now

typo, previous post said transformer,that was wrong ,my boo boo,should have said relay not transformer. As for the no fighting comment ,done with a grinn on my face ,you know life is stressfull enough ,need humor.thats me.

[GONWHLN]

It`s Fixed!!!!!!!!

Just got the news ,welder lives again.found a resistor that was bad and a transformer was wired wrong.1/2 hour labor all good to go. (Original transformer wired wrong ,not the one i replaced ,that transformer was ok,didn`t need replacing)

big thanks...

[GONWHLN]

you might be a welder if your farmers tan only goes from your shoulder to 1/2 way up your forearm 0n the inside of your left arm.

[GONWHLN]

Your wife makes you take your 7 year old son to the emergency room for flash burn in his eyes and you tell the doctor how to treat it ,the doctor checks it out on the hospital computer (because he has never had a case)and he comes back with a prescription for the same thing you bought OTC 4 hours before,...

[GONWHLN]

NO FIGHTING NOW!, I downloaded one manual said it was a 1985 machine 230/460 machine.Miss placed that manual ,downloaded a second book when steve asked for the numbers,said it was a 1987 machine 220/230 volt. my machine has 3 jumper lugs,wired center and right ,pulled trigger 12 volt to...

[GONWHLN]

Hi Steve ,sent you a PM with numbers on friday,may not have gone through ,so here are the #s again hope this helps. SER.# JF934816 MOD. MILLERMATIC 200 WITH SKP 35 OPTION.. Thanks for your help Don.

[GONWHLN]

still needing ideas to check out.

[GONWHLN]

I have used both hand and foot controles. hand control was a slide switch ,hard to control but handy for out of position work.It stayed in what ever position you set it (0 to max)and I set the machine to continious HI-FRIQ.I use foot control when possible ,much better for arc control.
Hope this...

[GONWHLN]

thanks steve ,I will write them down when I get home.If I recall correctly it checked out as a 1985 millermatic 200 with all options except spool gun. I will get the numbers and get back to you to verify.