back purge

[JJE]

thinks for all the info it worked great for me

[JJE]

stainless

the bucket is stainless

[JJE]

can you all show someone how to back purge a bucket to repair the pin holes in the bottom. And what all is needed to do so.

[JJE]

I have the some welder and the tank rusted out and I get a tank at northen tool for the north star stuff and mounted it to the top of it. And now have about 4 gals. of fuel

[JJE]

thinks for all the info. That is what I thought but was not sure so that is why i ask the pros.

[JJE]

where can I find a chart because they are not in a box and thinks for the help

[JJE]

Welding that I have r not marked to b ac or dc is there a good way to tell what they r. i know that they work better on dc as for getting them to start. they are 6011,6013, and 7018 in all sizes

[JJE]

I have a plasma cutter that does not work and would like to know if someone can help me get parts for it it is made by kanyang elec. It has on the front pro cut 130p in enghish

[JJE]

you do not have to have hf to weld alu. because i have a ecotig and it has ac but no hf and it works fine on alu.

[JJE]

there is a xmt 304 and a lot of spacer thing on craigslist in alt. ga for 3500$ if there is someone looking for one

[JJE]

what is the lowest voltage that it will turn down to

[JJE]

I just downloaded one for the one that I have on here. But I read some in it and the read that it you have low voltage on the outlets that you have to turn the fine adj. knob to 100%, See if that help you out.

[JJE]

thanks that is what I was thinking.

[JJE]

I had some rod give to my and do not know what they are as far as AC or DC rod. On the buzz box in the shop they will not weld right at any setting on it. So I used one on the old gas power welder and it did right on DC. The only thing on the rods 7018. How can tale if they are AC or DC

[JJE]

I Like to weld and that is why I am wanting to learn the tig. And there is not a lot of people that can tig. Plus living on a farm it saves my a lot, that is how I learned to weld because of parts braking.