Trailblaser 302 running a dynasty 300

[Murr]

Does anyone do this on a regular basis?
I have no option to plug into power, due to the fact project is at least 9kms from the closest power line...

Will a newer 302 run a dynasty 300dx tig on AC 250amp/????

[Murr]

Yeah i got that printed last night. The manual i had was for the latest model of the dynasty, not the unit i have which was manufactured in 1999

[Murr]

I will try today, finally found the info for this old welder! Never came with a manual And it was totally different then the one on their site

[Murr]

Reset??? Other then un plugging and plugging back in. No..

[Murr]

Dynasty300dx built in 1999, excellent machine i have used it everyday for 5-6 years.
Problem, in either AC or DC tig mode, when i press the foot peddle, its changes the either tig process to stick function when the peddle is depressed. I let off it changes back to tig mode. All the displays work...

[Murr]

I have a Dynasty 300 DX tig welder. I love the small housing, light weight and low current draw.

Is it possiable to run a wire feed unit off of the unit? I want to make a ceiling mounted wire feed unit on a boom so I can have good access of wire feed around the shop. Without taking up...

[Murr]

Armstrong BC < the interior the nice part >

[Murr]

I don't fancy paint much. When the car gets sand blasted , I will blast the stand and send it out for powder coat. Its uncany but the Powder coaters have a blue <star blue> thats SOO close to miller blue. My benches are miller blue currently. But it was too much work to paint, when you don't...

[Murr]

My good ole Dynasty 300 DX, and I had some time the other day. So between the 2 of us we fab'd up some steel and built a nice little rotisery. Its not as fancy as some others. But it does everything I need it too.

Casters are Faultess, 6" ones at the corners and 4" ones in the...

[Murr]

I was surprised to get the email regaurding my new tape measure. I was just looking at another new Miller welder the other day. Didn't bring it home, but soon. Thanks miller

[Murr]

Table

Here is a pic of my welding table
http://groups.msn.com/holyshift/52ma...o&PhotoID=1023

48x 48 x 1" thick, has lots of overhang to clamp stuff to. 1 foot is adjustable to take any rock out of it. Each leg has a holder...

[Murr]

Hello Miller Jack

I had sent you a PM, note sure if it went thru.

[Murr]

Tungsten

On my Dynasty, when the AC start problems arise, it doesn't matter whether or not there is a fresh Tungsten, old, sharpened, pure or ceriated. It WILL not start. In a pinch I have tired even changing to scratch start and no amount of trying will the machine start an arc. ...

[Murr]

Dynasty

Hello fellow welder

I seem to have this same problem with my 300 DX. Its about 7 years old, Doesn't have alot of time on it, but starting in AC is very troublesome. I find I can get an arc usually when I grind a new tip to the Tungstun, but not all the time. Some...