350P vs 352 MPa

[gouch95]

Dyn #50 Points

It would have to be a pre Blue lightning 350. I just put new points in mine at work take the Right side cover off they are on a board at the very front of the Machine I unpluged the two sets of wires and removed the four screws and installed the points on my bench. seemed...

[gouch95]

Way Back when, I worked in a body shop that did a lot of heavy collision work. We would always put a heavy welding blanket over the chain in case the clamp tore off. I know it would slow the chain when it let loose. Not saying it made it safe, just that it helped.

[gouch95]

Gooseneck

I think at that point I would just get one the way you want it, I looked into putting Torsion bars on a trailer for a guy who does Granite countertops and it was cheaper to order a new one the way he wanted it.

[gouch95]

A lot more info needed, material type and thickness? Pics? end use?

[gouch95]

Mag vs Clamp

I have mine set up for both I have a dinse connector and can change if need be. I think part of some peoples lack of a good experience with a magnet is they don't think the attachment point needs to be clean, they think well if it sticks its good.

[gouch95]

First is your fit up nice and tight? next what type of point on your tungsten? Then my next suggestion is turn it up a little and weld fast. and I only use 80-D2

[gouch95]

More than Likely the liner is frozen in the gun and no gas is getting bye that was a normal thing for that gun.

[gouch95]

Hello all, my first post here. A couple of questions regarding the pulsed programs on these two machines. 1st are the programs the same on both machines any advantage to one machine or the other in pulsed mode? 2nd the specs say synergic for .035 and .045 has anyone had any success running .030 or .023...