millermatic 211 autoset and spoolmate 3545

[walleye1]

thanks for the info, i talked to my supplier and he got the same info, guess i save the 3545 for the T B 302 and get the new spoolgun

[walleye1]

will the spoolmate 3545 plug and play with the new millermatic 211 autoset? i know the spoolmate 100 will work but do not want to buy a new spoolgun if i dont have to, thanks for any help!

[walleye1]

Ok thanks for the info, I will take a closer look. I did not see a tray apon first look. Thanks for the info

[walleye1]

Whats the best way to remove/replace a battery in a trailblazer 302? it sits in a small space but looks like a pain to remove, any ideas/help would be great! thanks!

[walleye1]

Leefy, i bet if you stop into some of the resturants around your place you could find something to weld, i weld alot of resturant "junk" through out the week on site, i wish it were for myself but im not to that point yet, my companys charges are 81.00 just to show up(depending on how far...

[walleye1]

SundownIII, thanks for the info..... i will have to get a few small rolls of the 5356 and do a little trial and see how it goes. thanks again!

[walleye1]

Opps sorry my mistake, im putting together a flat bed with 1' sides to haul brush and such for a lawn care pickup truck, the tubing is 2x2x1/8 3x2x3/16 4x2x3/16 6061-t6 i will be using the trailblazer 302 along with the 3545 spool gun, sorry for leaving out so much info, anyone has some good advice...

[walleye1]

Need to weld some 6061-t6 Alum box tubing approx 1/8 to 3/16" in thickness, which wire would give the best results? Will be running .035 through a 3545 spool gun. Thanks for any insite.

[walleye1]

yup i ran the alum, i dont even remember if its 4043 or 5356 or even if its .030 or .035 but it ran good!! i was real supprised!! once the weather gets a little nicer i can do some more "tests" By the way, how do people take what you say in a previous and add it into the current post? ...

[walleye1]

I have only used mine with alum, did you try any mild steel with a c-25 gas by chance? i was going to give it a try but havent had a chance yet, was wondering how well it works, thanks.....also what spoolgun did you get?

[walleye1]

redintn, I welded a fryer filter at a chilis the other day, that thing was gross!!! the bottom was 1/4" thick with gelitan like grease!! makes you want to run out to a resturant and eat!!??

[walleye1]

The sga100c is made for a miller 3035 or 3545 spool gun.it is a adapter with a contactor built in, i use the sga100c with my TB302 and it works great! if you have a miller catalog it shows you right in it how to hook it up.

[walleye1]

redintn, Do you do all types of commerical kitchen equip repair? I do repair for one of the major equipment companys and also do all the welding for our branch. as for repairing the wok that is something i havent had the pleasure of doing.....yet! most of the welding we do is on dishmachines and ...

[walleye1]

Was looking at the jd2 bender #3 i think it is, are they as easy to use as they seem to be? im thinking of buying one but not sure, any insight would be great, thanks

[walleye1]

Thanks for the info guys, i personaly have well water, i have never had a issue here and im sure things will be ok now that its +5 degrees but last night it was about -29 and it got me thinking about this, like i say i have heard of it but thats about it, i have a TB302 and a Dynasty 200dx,