has anyone had experience with " Swag off road"?

[ampedtech]

Willie where is your sense of adventure? You already took it out in the "woods". Maybe you could start the process by shooting that hole!

After watching this video, it could be that the desired out come is not achieved!

Nice fire plume though.

http...

[ampedtech]

thanks to all for the low down on swag!

I got to have their heavy duty brake.

I know I could make it myself, I even have all the materials. What I don't have is a mill to bevel the top die. I think that the cost at a machine shop to make that bevel would get pretty...

[ampedtech]

http://www.swagoffroad.com/

I was thinking about buying their heavy duty press brake attachment.

My issue is flipping my credit card number to an unknown entity.


I want to here the good, the bad, and the ugly!

[ampedtech]

my 3 cents (the increase is due to inflation)

Medical and standard industrial o2 is filled from the same source.

political and administrative record keeping about the fill and the process of the fill are required by the FDA.

Purity requirements for med o2...

[ampedtech]

I have a SPECTRUM 375. It has always been hard to adjust the air pressure.

Today the torch would not fire. The pressure was (I thought) right at 60psi.

I could not get knob to move....even with channel locks!

I took the cover off.....figured I take apart...

[ampedtech]

plunged into 15 amp circuit should be ok, but with diminished output

Just pulled up the manual, section 3 (specs) indicate that a max of 63 amps (@ welding voltage) is all you will get. If you increase the output you will just blow a breaker. Don't constantly weld on the verge of blowing...

[ampedtech]

I scanned the tos but I am still unsure.

May I, post about a KILLER deal?

It is my intention to also post the name of the retailer and provide a link to them.

I have no dog in this race. I just want to share with others on this forum.

In the...

[ampedtech]

retired now (not from welding)

, but it cost $50 to say "good morning" to me and that is if YOU are bring me the coffee!

[ampedtech]

I see that I am full member now (not junior)

aren't you guys supposed to buy me a beer or something?



Maybe this should be it's own topic, it might yield! more beer

[ampedtech]

IP camera

google: "IP camera" IP = internet protocol

this type of camera will plug into your router.

You can look through the camera on your pc, internet or smart phone.
Make sure you get one you can password otherwise everyone can look through...

[ampedtech]

Check this guy out......I don't think that you could build one for this price unless

I don't think that you could build one for this price unless you had your own mill to shape the die with.


http://www.swagoffroad.com/20-TON-Pr...-DIY-Builder-K...

[ampedtech]

Thanks for all the responses....some good advice

The "blade" that mad me write this thread is Pferd. made for steel.

I have been using this cutter about 20 years. I have already been using many of the methods described here. One I have not tried is setting the...

[ampedtech]

Often when cutting off larger thicker steel with an abrasive (made for steel) 14" cut off the sparks and cutting stop and the steel gets hot.

I can detect the the "blade" is hot but only for a very short time.

Even after the blade and steel cool several min....

[ampedtech]

Could what you need gone is mill scale?

Hard to take off with hand grinding or sanding operation unless the grit is REALLY course.

I know you said no chem, but I have had great luck with Muriatic Acid, get it from concrete supply 28%. Dose take time.

media...

[ampedtech]

forgot to indicate that 3/8" angle iron stiffener will be 4 places each side

by the way one of the most important things that I have learned is that I must drink beer when waiting for stuff to cool!

Not only can I do that, I can do it well.

...