Search Result

[OHT]

Something like this if not to bulky. Room for 20A 120V.
http://www.ebay.com/itm/350553624842...%3AMEBIDX%3AIT

[OHT]

Get your serial number and download the correct parts manual.

http://www.millerwelds.com/service/l...ER%20302%20GAS

[OHT]

I never go below 40-45 cfh even inside. Don't push dual shield if you can help it, drag it.
Approx. 3/4" stick out.
Has the wire been in high humidity for a while? Just some things I've had problems with in the past.

[OHT]

Little more info. would help. Type of wire, straight CO2, material thickness, joint prep, etc? Example would be 1/16" Triple 7, straight CO2. Good starting point would be 25V, 175in/min. See attached link.

http://www.hobartbrothers.com/upload...ts/Triple7.pdf

[OHT]

http://www.mcmaster.com/#weld-on-tank-fittings/=mgkf4h

[OHT]

Download Operator manual here.

http://www.millerwelds.com/service/ownersmanuals.php

[OHT]

Which model is it? See attacked link. It will tell you the pressure range and inlet connection. If it's an SR600-125-540 your in luck. But it's likely a 350 or 500 psi range which is a little high for your application.

http://www.thermadyne.com/IM_Uploads...49_56-1310%20S...

[OHT]

Download the owners manual. P-6 looks like low input voltage.

http://www.millerwelds.com/service/ownersmanuals.php

[OHT]

Will get you set for dual and inner shield.

http://www.ebay.com/itm/130619717722...#ht_500wt_1003

[OHT]

http://thermadyne.com/IM_Uploads/Doc...ok_11-4-10.pdf

[OHT]

Dave got me to think, he’s a sharp guy. If the Q300 came with the 12RC it could/probably has a .045”-1/16” liner (#44215). The .035”-.045” liner is part # 44115. The link below shows what the Bernard gun numbers mean.

http://www.bernardwelds.com/service/...Configuratorv1...

[OHT]

I’m pretty sure that the gun you have comes with a .035/.045 liner so you should be good to go.

You can get a conversion kit(NS-FLX Self-Shielded Conversion Kit). It’s actually is only two pieces.

7010046 Tip Holder
7010024 Insulator

http://www...

[OHT]

3/8 Grade T 50' new is around $80 @ LWS. Western Y's with valves new approx. $35 each @ LWS. Problem not many people want 3/8". PITA unless you need it, stiff, heavy and hard to roll up, if not on a reel. Please let us know where your going to sell it. I only have 25' and could use 50'...

[OHT]

Righand, You make me laugh, so true! I wear dirty white coveralls in the summer. Much more comfortable since I got rid of those special straps.

Is there any major preference in pancakes "The Original Pancake" or "Sarge's". I really think they would be great in...

[OHT]

Industrial Ladder was the best price for fold-a-jack's I could find. Looks like about $106 for std Fat Jack.


http://www.industrialladder.com/prod...categoryID=360