what's the safest way.......

[k zen]

Hi

What's the safest way of cutting an old oil tank or propane tank .

THANK YOU

Bobby

[k zen]

HI

you drill a hole on the side of the receiver hitch , weld a nut and as you tighten the bolt it squeeze the hss and it stop moving .

Bobby

[k zen]

VERY SPECIAL REQUEST FROM A LADY , ONE OF A KIND CUSTOM RAILINGS , THE ONLY STAIGHT LINES IS THE ANCHOR PLATES . TOTAL OF 42 LINEAR FEET .
H/R 1 1/2 FLAT BAR X 3/8 FRAMING , INSIDE IS 3/16 .THE TOP IS HALF CIRCLE 5/16 FORGE HEATED TO FORM AND WELDED ALL THE WAY .
A LOT OF GRINDING AND...

[k zen]

HI everybody

some custom railings I did , the owner did the wood inside .

C/R 11/4 flat bar , powdercoat ,

Bobby...

[k zen]

hi Kayla

just to give you an idea , cold roll 1 3/4 square head and feet , 1 x 2 outside frame with flat bar inside . the wood is zebrano from africa . the finish is placage dull argento .

Bobby...

[k zen]

a piece of sheet metal

[k zen]

Hi everybody

it's been a while posting , this is the last order , custom fence for the backyard , french customer with specific style , neet little job , the hinges and the lock are not install yet.
Will post the final and more projects later .

Bobby...

[k zen]

HI everybody

What are the basic rules for back gasing , I just presume that at the bigining you let more argon in just to let the air out and after that you back off on the CFM of argon , and what about the size of hose in and the size of the exit hole ???????
I am welding a davits...

[k zen]

Hi everybody

I am looking for the distance between center to center of the holes in the block , i bought the scroll attachement but i want to do the block myself , they sell the block for 108,00$ at unibender , just imagine a piece of 2x3 and 3 sleeve of 3 inches , i can do that for cheaper...

[k zen]

Very well built , congradulation , looking forward to see more pictures of differents fixtures , keep up the good work.

[k zen]

1956 MERCURY M-100...

[k zen]

HI

Just to show you the table i did on friday , still some filling to do on inside corner and after that ready for placage , satin nickel , stainless steel look alike , i use CR 1 3/4 square tubing , and the glass is 22x44 inches .

Bobby...

[k zen]

Hi Guys

One More Hour And This Chair Will Be Finish, Just No More Argon In The Bottle , Get A New One Tomorrow , Just Doing Stuff For Myself To Practice , Going Towards Custom Furniture , As A Part Time Job For Now , Hopping To Do That Full Time Job One Day .

Bobby...

[k zen]

Nice Work As Always , I Like Your Style , I Am Going In That Direction , Doing Custom Work , But For Now I Practice By Doing Stuff For Me , Anyway Keep The Pictures Coming .

Bobby

[k zen]

HI

NOW I CAN SAY THAT MY 24X24 GARAGE IS FULL , NO MORE WALL SPACE AVAILABLE , JUST BOUGHT 12X36 LATHE , VERTICAL SAW, BELT SANDER, NOTCHER AND SOME TOOL FOR THE LATHE , AND THAT IS ADDING TO WHAT WAS ALREADY IN THE GARAGE , ANYWAY I AM NOT COMPLANING , JUST HAVING FUN THIS WEEK-END...