Serial number:
ME340664L
8 results in 0.0087 seconds.
-
Dynasty ''rt'' code? help!
Hi!
I have a Dynasty 200dx that I purchased in September of last year.
Earlier today it stopped working. Only showing an ''rt'' code with the value at which I'm pressing the pedal. No clicking, no buzing, no HF or gas flow.
this is the third time this happened.... -
Thanks for the speedy reply!
I rewired it with a new Primary cable, same results.
The new cable had 3 wires in it; ground, black, white. The old cable had 4, ground, black, white, and red. The white wasn't wired in the connector, so when I rewired in the new cable I connected...Leave a comment:
-
I checked the entire length of primary cable and couldn't find any bumps, lumps, or binds that would indicate damage. I even re-wired the cable in the machine and the connector. After flicking the switch on and off I managed to get it working once.
I have another length of cable that...Leave a comment:
-
What should I look for in terms of Damage? And why is such a large guage cable so sensitive?Leave a comment:
-
Dynasty 200 startup problems... again.
Our trusty Dynasty200 has been acting up again.
When turned on you can hear it hum, but no readout.
I was told this may be caused by the flexible power cable protector that may dig in the power cable and cause it to fail.
I removed the said protector last year and that seemed... -
thanks!
The machine has been moved a couple of times to various events (we're a bicycle frame manufacturer and we do welding demos at races and trade shows) but that is mostly 5-10 times a year.
The Primary cable theory makes senses, though. The cable routing through the...Leave a comment:
-
My Dinasty 200 has trouble starting.
Hey, it's my first time using this forum.
My shop's Dinasty200 has trouble starting.
It first started bugging about a year ago. When I turn it on, I hear it ''hum'' but the read-out doesn't turn on. Usually all I have to do is turn it off, wait for the humming to die down and turn...
Leave a comment: