stainless with a 350p and spool gun?

[overkill 19]

And no have not welded stainless before.

[overkill 19]

I just figured id use the spool gun, as i assumed it would be cheaper to buy a smaller spool, plus argon is rigged up to that side anyway.

[overkill 19]

Thx guys, I'm a hobbyist at best! Id like to learn how to tig one day! <br />
All im doing is cutting the end off SS handle "the rectangle" part the mates to the valve stem. Then welding a ss pipe to it and a T Handel on other end.

[overkill 19]

Will pure argon work? I have 2 inchs of weld to do. I have a bottle of that and reg mig mix Co/argon mix...

[overkill 19]

Can it be done?
Im making a ball valve handle extension.
Can i buy a small spool and mig this?
What gas works best?

[overkill 19]

Zip Cut disks are Gods best friend! So be careful with them or you might meet God in person! Make sure you wear the proper protective gear, when those blades come apart its nasty. That said they truly are great! I use them all the time....

[overkill 19]

Thanks alot. Thats what I was hoping for. This stry bottle is full and didnt want to "not use it due to un known contents". thanks for all the info, saved me $100 of Argon!...

[overkill 19]

Does it say 72% Argon 25% N.O.S

I was hoping that the Un_ _ _ _ # would tell a guy what is in the bottle percentage wise.

Thnks all....

[overkill 19]

K , I had found that one but was confused alittle ! What # is mixed argon then ? Or is all un1006 argon then if it's has a mix to it.. It's labeled in % of X gas and % of Argon?...

[overkill 19]

Tried searching for but not much luck. Does anyone have a list of Agon #'s mixes? I have a bottle in shop all it has on it is "Argon UN1006" How do you tell if its Pure or a mix?

[overkill 19]

I'm just finishing building my garage. I have a lot of the
Of the same concerns. I installed swing out man doors so it's harder to kick in. I also installed dead bolts on the overhead doors. Lots of motion lights. Plus a security system!

[overkill 19]

Thx. I'm not to worried right now as I'm not welding anything close to max out put of this machine. I probably could run it off # 12 for the light stuff I will be welding at first!
I figured I could get away with 50amp plugs, but the 60s were only a day away and $20 more for two recepticals and...

[overkill 19]

Well that's what I said.... Like 4 x. He said it should be 110 amp breaker??? The duty cycle of the 350p requires a larger breaker! You can upsize 200% by code is what he told me!
Again I'm not a electrician at all but it sealed off to me, that's why I posted it! I bought 60amp single phase plugs...

[overkill 19]

My electrician wired my 350p with # 6 " I think, it might be bigger but it's not a long run" feed by a 100amp breaker, with 60amp plug and receptical. Single phase. I've had zero issues ,and she runs great.
I thought the 100 amp breaker was around but he said it had to do with duty...

[overkill 19]

http://www.how-to-faux-finish.com/color-washing.html