need help to identify miller mig tip part#

[tooldude56]

I have a bag of some mig tips that I have'nt used in a long while and want to peddle on ebay.The problem is that I am not sure of the miller part number,but I do have one that has a miller logo on it and it looks identical to the bag of tips,but no part # on it.The tips that I have are marked .045 and...

[tooldude56]

There was a thread on this a while back,but I ran accross this website today and found it to be quite interesting reading.Check it out


http://www.opetrol.com/



tooldude56

[tooldude56]

Sounds like a fried rectifier.Time to look for another welder.That's why I never use my good machines for airarcing.Pick up an old junker stick machine that you do'nt have much in to,for that pourpose.

tooldude56

[tooldude56]

Actually,I have been watching ebay for a long time and have not had much luck finding any heating tips for my w-17,except for the one I just picked up that has some severe problems.I am now looking for a tip to screw in to that mixer.

tooldude56...

[tooldude56]

Wowe There's a lot of helpfull information there.Sizes.BTU calculation and just about everything I need.
I really do apprecciate it.


tooldude56...

[tooldude56]

Yah,I sold my mixer,2-stage Concoa stainless regulators,hoses and the whole shootin match,If you want to call it sell.The whole thing brought only around $700.00 and the regulators alone would cost $1,400.00 to replace,so I did not do too good.I set this up,because I had been looking for a optima pulser...

[tooldude56]

I have a mixer for my Oxweld W-17 and I am looking for a fairly good sized multi-flame heating tip to screw in to it.The brand is not important,as long as it is 1/2" diameter where it screws in to the mixer or adapter.It would be nice to find one with standard 1/2"-20 bolt threads on it,but...

[tooldude56]

Have you tried an oxy mix yet ? All I can remember ever using for spray is 95-5 and 98-2 argon/oxy mixes and they work well.I have heard,especially on the boards,where guys are using the C02 mixes,but I dont remember trying it myself.

tooldude56...

[tooldude56]

Hi Hank:

On the 98-2 Is this 2% oxy or 2% C02 that you run for spray ?


tooldude56...

[tooldude56]

I was wondering if anyone here had any hands on experience with the specialty mixed Gold gases from airgass,like the STEELMIX,STEELMIX EXTRA,STEELMIX 3,STAINMIX 3,STAINMIX,STAINMIX TIG or ALUMIX on manual applications ??These mixes look interesting,but I would want to here from someone that has trid...

[tooldude56]

Actually,Pellets and anthrasite coal make more sense in my area now,because the farmers jacked the corn from $80.00 per ton 1 year ago,to around $160.00 currently.If I burn corn,I will most likely mix it with pellets.The coal thing sparks a lot of interest with me too.Any info. you could give me would...

[tooldude56]

I am looking for some info. from someone that has built a corn or pellet stove or furnace.I have a general idea of the way these function,but am looking for part specs.,like exhaust motor specs,draft motor specs. and general tips on building one of these.I have been watching ebay for items like augers,exhaust...

[tooldude56]

I have owned several heavy duty pickups and have tried a couple different tire.My favorite so far,is the Bridgestone Dueler AT Revo in a 265/75/16 load range E that I have on my 2004 2500HD Chevy Silverado with the Duramax and Alliso combo.I did a lot of research on this tire and it is extremely popular...

[tooldude56]

Can we only enter one time per promo code ?


tooldude56...

[tooldude56]

Just got my Optima control for my XMT and would apprecciate some input from others that are using an Optima on steel.I do not have the 95-5 C02 gas that the programs call for,but do have 95-5 Oxy. Has anyone used this gas with this control ? My other gases are Argon and C-25)75 ar & 25 C02),but...