Search Result

[Showdog75]

We make that weld with ErNiCrMo-3, sometimes just ErNiCr-3 without the moly.

[Showdog75]

To the top

[Showdog75]

I was referring to normalizing/stress relieving....

[Showdog75]

If it's gonna be heat treated weld it with 4130 if not use er80sd2

[Showdog75]

If I were doing this job I'd fit the head back on with the weld to help with positioning then I'd grind the weld out for a proper re-weld. I use some zirconium flapped disks that don't seem to affect aluminum weldability. Stainless wire brush cups on a die grinder work well then I usually follow with...

[Showdog75]

You should dip the rod in rod oil, that'll help. Old timers trick! !!

[Showdog75]

A xmt doesn't have high frequency unless you've added a external high frequency box such as a hf-251. The amperage would be the same.

[Showdog75]

Were are you located Dw ?

[Showdog75]

Forget loading all your music, get Pandora. The best thing to happen for music lover's Imo....

[Showdog75]

I've got a Miller Optima pulser for sale or trade.

[Showdog75]

From what I understand there is much less glare with hydrogen than acetylene so it's easier to see the puddle.

[Showdog75]

I use the red handle Klien lineman pliers.

[Showdog75]

I'm pretty sure that new pipepro is a diesel engine that is fuel injected, not as simple as a jet change.

[Showdog75]

Yes on putting filler on each side.Always keep your filler as close as possible to puddle to insure you keep the molten end from getting contaminated.

[Showdog75]

Wide gap you can't help but to have a keyhole. I'm a advocate of small filler as it is consumed better Imo. Look up my old post "pics of what I do at work" I explained my theories pretty well in that thread.