Bobcat broken ring?

[thatsgre8t]

Gas in oil

I drained oil and it definitely had gas in it.
The fuel tank is at bottom of unit, not top.
Don't understand how fuel would have gotten in crankcase.

[thatsgre8t]

My bobcat sat up for about a year without being cranked. Recently I tried to use it and couldn't get it to start. I ended up changing the carburetor with a new one. After changing the carb, it immediately started and ran fine for about 30 seconds followed by it bogging down with a solid stream of white...

[thatsgre8t]

Gtarp, Will do. Still no word on it yet.

[thatsgre8t]

dfeasby, I have already tried it with no wire -- same results. Jumped the connection with paper clips, same results. Went ahead and took it to the LWS. I had to get it there this morning because they dont service them but it will get picked up and taken to Shreveport (2.5 hrs). Pick up is every other...

[thatsgre8t]

Cruizer, the drive does not stop as soon as I stike an arc. It will stop a few moments later. It gives me just enough time to make a long tack if you will. It will stop with the flux wire, solid wire, or with no wire. Gas on or off, roll tension tight or loose doesnt mater. The spool tension is...

[thatsgre8t]

The spool tension is good. The drive roll is correct.

I guess its going to the repair shop...This sucks.

[thatsgre8t]

Harold,
You are right about changing the polarity. I did change it when I changed wires. I didnt mention that cause I dont think it maters as to why the drive roll stops turning. With that said, I have also changed it back with the same results.

In my first post, I said "as...

[thatsgre8t]

If you dont mind---How much did they pay per rod?...

[thatsgre8t]

Hi guys, Hopeing some of you can help with my MM211. When I press the trigger on my gun, the welder only feeds wire for just a little over a second and then stops. As long as you keep pressing the trigger, it will feed for the second and stop again. It welds fine while it is feeding.

...

[thatsgre8t]

Cut one end off. Sink it Horizontally in a lake, sandy bottom, about chest deep. Come back in a few days and stick your hand inside. Pull out big Flathead.

[thatsgre8t]

I agree.

Thanks.

[thatsgre8t]

"Spanner"

Black Wolf,

Its not just the aussies. I think everyone else in the world uses the word spanner for what we north americans call a wrench. Kinda like gas and petro

[thatsgre8t]

That could go the other way too. You hang one too close and they find you on the way to the trap. Dont know if i would want something hanging around that is suppose to attract wasp/yellow jackets. IMO...

[thatsgre8t]

My bobcat looses prime at 3 gallons left in the tank. Always has from day one. I bought it brand new in '05

[thatsgre8t]

Awsome

Very cool cart. Awsome detail.