Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
hitnmiss
Junior Member
Last Activity: Yesterday, 02:59 PM
Joined: 08-06-2017
Location:
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • hitnmiss
    replied to Need help with AMT304
    Thanks. I will do this.
    See more | Go to post

    Leave a comment:


  • hitnmiss
    replied to Need help with AMT304
    That dollar number says it all.
    See more | Go to post

    Leave a comment:


  • hitnmiss
    replied to Need help with AMT304
    Thanks for your information and concerns about the safety issues with capacitors, I have worked with them when I worked in industrial maintenance. They are like electric fences, I learned too respect very quickly.
    I spent over a hour with a technician at Miller support, with the unit powered...
    See more | Go to post

    Leave a comment:


  • hitnmiss
    replied to Need help with AMT304
    Thanks for helping me with this project.
    I am not a electronic technician but have some experience with circuit boards. I held a general class Ham license (K5CMF. Assemble my gear ( transmitter) from Heath kits, you are probably too young to remember Heath kits. A few weeks ago I installed a capacitor...
    See more | Go to post

    Leave a comment:


  • hitnmiss
    replied to Need help with AMT304
    Thanks for your help and quick response.
    The serial number is LB186315.
    The voltage flipping occurs in both stick and VS.
    I have done a visual inspection of board with close attention to the Caps. I am using the same power source for years. I forgot to mention that when connected...
    See more | Go to post

    Leave a comment:


  • hitnmiss
    started a topic Need help with AMT304

    Need help with AMT304

    Your help would be much appreciated. I bought the xmt304 two years ago and using it to feed a Miller extreme wire feeder. The symptoms now are, 1. The voltage flips from the set voltage to 7 about every 2 seconds 2 in stick mode the amps is wide open. I can put a jumper wire between terminal A and...
    See more | Go to post
No activity results to display
Show More
Working...
X