Announcement

Collapse
No announcement yet.

welding trailer and flat bed trailer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bert
    replied
    Terry

    Thanks so much for explaining that. Question: "Bar soap to slide the drawer."
    Do you think "Irish Spring" would be better than "Dove" since it's got the green and white stripe??? Sorry, Couldn't resist, 1st time I heard using soap!!! Why don't you use grease? You wouldn't get your hands dirty, since it's underneath, right?
    thanks,
    bert

    Leave a comment:


  • dabar39
    replied
    trailers

    nice job on both trailers, looks like you put some thought into your welding trailer, good job. Dave

    Leave a comment:


  • terry welds
    replied
    bert

    the drawer is made with 1 1/4 angleiron and is welded down 6 inches from the frameand it is 3 ft wide and 6 ft long.we didnt put rollers on it so it slides on the angle frame.i put bar soap on it and it slides real easy the lead holders are made with 1 1/8 square tubing with 1 inch welded to the floor so we can take the leads off and they will stay on the holders.we have a table that is 24 x 24 thats sets on the railing anywhere on the trailer for a 6 x 10 trailer we have everything we need on it.good luck with your trailers.feel free to contact me for any questions you might have

    Leave a comment:


  • MetalCrafter
    replied
    Hey Terry,

    Please post some more pictures of the flatbed.

    Thanks.

    Leave a comment:


  • Bert
    replied
    Terry,
    HOW did you make that slide out compartment? The pic was too small on my computer to see what you were wrapping the leads around. Tubing? Welded to the trailer floor with the machine in the middle? Trailer AND setup is AWSOME!!!!!!! Something for us newbie trailer maker wannabees to look up to!!!
    bert

    Leave a comment:


  • terry welds
    replied
    thanks

    Thanks to all that has taken the time to look at my projects.

    Leave a comment:


  • terry welds
    replied
    reply

    It can lift about 1500 pounds.the trailer itself weighs in at 3440.the most of the work I do is for local farmers & on alum grain trailers.thank you for taking the time to look at my projects.

    Originally posted by MMW View Post
    How much can you lift with that hoist? Nice job! That slide out drawer is great idea.

    Leave a comment:


  • MMW
    replied
    How much can you lift with that hoist? Nice job! That slide out drawer is great idea.

    Leave a comment:


  • makeithot
    replied
    welding trailer

    nice job bro, I preffer to have my gear mounted on a truck but that looks like it is going to work out real good.

    Leave a comment:


  • paulrbrown
    replied
    Terry, that sliding drawer is real cool, the welding trailer looks to be layed out real well, best regards, Paul

    Leave a comment:


  • terry welds
    started a topic welding trailer and flat bed trailer

    welding trailer and flat bed trailer

    the 6 x 10 flatbed I just finished last weekend.the frame was a pop up camper frame.welding trailer was built from scratch.
    Click image for larger version

Name:	036B4832-927B-DF4D-7A4760BCED6F092F.jpg
Views:	1
Size:	57.9 KB
ID:	519805

    Click image for larger version

Name:	0367EDD3-ACAA-8CAC-3008A774C9DCDAEE.jpg
Views:	1
Size:	54.6 KB
ID:	519806

    Click image for larger version

Name:	0373899C-9420-7190-A8B314365D6CAF1F.jpg
Views:	1
Size:	58.6 KB
ID:	519807

    Click image for larger version

Name:	03722716-93BB-F3FF-19760EB8A1E7D377.jpg
Views:	1
Size:	57.0 KB
ID:	519808

    Click image for larger version

Name:	036F2A2C-B1BD-0566-457D6A84ECF7C7E7.jpg
Views:	1
Size:	56.4 KB
ID:	519809
Working...
X