No announcement yet.

Bought some old, but low hours,equipment,...

  • Filter
  • Time
  • Show
Clear All
new posts

  • Bought some old, but low hours,equipment,...

    Newbie here. Just bought a Trailblazer 250G with an HF box and an old Spoolmatic 3 gun.
    Question #1: Does the Spoolmatic plug into the High Frequency box, HF-251D-1?

    Question #2: Is a spool gun and a wire feed box two different designs for doing the same thing?

  • #2
    question #1 = i dunno...
    question #2 = it pretty much is the same way of doing things. I see the spool gun as a way to mig weld aluminum tho. But if i had a engine drive i would use a spool gun insted of a box feeder, it's cheaper and jus seems more practical to mee. Can you get extentions for the spool guns tho? you know?
    Jorgensen MFG.
    Custom trailers:from utility to semi trailers i make em all.
    [email protected]


    • #3
      Unless that "box" is a WC-115 which is the box you need to run a spoolgun on a trailblazer. It runs the positive lead into it and runs of of the 110v circuit also. It should never be ran thru the freek box tho.
      Miller Dynasty 700...OH YEA BABY!!
      Miller Dynasty 280 with AC independent expansion card
      Miller Dynasty 200 DX "Blue Lightning"

      Miller Bobcat 225 NT (what I began my present Biz with!)
      Miller 30-A Spoolgun
      Miller WC-115-A
      Miller Spectrum 300
      Miller 225 Thunderbolt (my first machine bought new 1980)
      Miller Digital Elite Titanium 9400


      • #4
        The HF box is for TIG.....nice find...
        Good Luck,
        George W. Bush was saving your butt whether you liked it or not!
        Fear is temporary, regret is forever
        HH210 with SG


        • #5
          Do not hook up the spoolmatic to the hf box,the spoolmatic was never designed for or needed high frequency.The older spoolmatic 3 will be a direct hookup to your engine drive 14 pin,no extra box needed.The newer spoolmatics need a w115 or whatever box.Just trying to help.
          Trailblazer 302
          Suitcase 12vs
          spoolmatic 3
          victor journeymanx2
          esab multimaster260
          esab handy plasma 550
          Makita grinders
          21cfm honda compressor
          f350 superduty 4x4
          Lots of bills lol