Announcement

Collapse
No announcement yet.

Case loader heater core housing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Case loader heater core housing

    Heater core was leaking a long time and when they pulled it apart the housing was pretty rotted. They were able to get all the parts except the bottom part of the housing. So I had to fabricate a new one by copying the old one.
    Click image for larger version

Name:	20200609_084848.jpg
Views:	184
Size:	1.79 MB
ID:	608968
    Click image for larger version

Name:	20200609_084911.jpg
Views:	161
Size:	1.85 MB
ID:	608969
    Click image for larger version

Name:	20200609_084939.jpg
Views:	160
Size:	1.89 MB
ID:	608970
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  • #2
    Should of taken in between pics but here is the finished piece before paint. Several cut outs, holes, a few studs and some weld nuts. Making the box wasn't to bad it was all the hardware, holes, windows, etc. that really add time onto it.

    Click image for larger version

Name:	20200612_170042.jpg
Views:	192
Size:	1.71 MB
ID:	608976
    Click image for larger version

Name:	20200612_170102.jpg
Views:	159
Size:	1.47 MB
ID:	608977
    Click image for larger version

Name:	20200612_170126.jpg
Views:	160
Size:	1.61 MB
ID:	608978
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      Nice work! That took some time.

      Comment


      • #4
        Really good work

        Comment


        • #5
          Nice

          Comment


          • #6
            Nice work! Those are the parts that the manufactures will charge you $1000 for if the equipment is old. I got an old KW dump truck and they wanted $1400 for the box and blower motor. I ended up making one myself as well.
            Millermatic 252, Hypertherm Powermax30 XP, Hypertherm Powermax45 XP, LOTOS LTP5000D https://fabricationguy.com/

            Comment

            Working...
            X