Getting several new trucks in need to build 3 beds 8' x 24' with lift gates on the back. This is how we do it.
Step 1 Set the lower support rails on jack stands square them up and weld in spanner pieces.
Step 2 Layout channel 4" x 4.5# roughly 16" centers tack the channels at both ends and run a string so all channels line up. Tack each channel in place.
Step 3 Put on side rails and end rails tack in place
Step 4 Weld all complete
Step 5 Layout and cutout for door post
Step 1 Set the lower support rails on jack stands square them up and weld in spanner pieces.
Step 2 Layout channel 4" x 4.5# roughly 16" centers tack the channels at both ends and run a string so all channels line up. Tack each channel in place.
Step 3 Put on side rails and end rails tack in place
Step 4 Weld all complete
Step 5 Layout and cutout for door post
Comment