No announcement yet.

My Wood Processing setup

  • Filter
  • Time
  • Show
Clear All
new posts

  • My Wood Processing setup

    I acquired an old, super heavy, 3 pt hitch log splitter a few years ago. It only could be operated from the hydraulic lever on the tractor. I modified it by adding an axle, spool valves for the hydraulics, a retractable tongue so I can haul the thing with my 'Buzz Saw' attached. At first I had no log lift, but added that last year. The buzz saw was completely redone. Installed the safety guard around the blade, added a right angle gear box, pto shaft (was originally driven with a flat belt, then a small engine was added), beefed up the frame, etc. Thing works great.Click image for larger version

Name:	IMG_1230.JPG
Views:	1
Size:	83.4 KB
ID:	530516Click image for larger version

Name:	IMG_2207.JPG
Views:	1
Size:	266.2 KB
ID:	530517Click image for larger version

Name:	Picture 020.jpg
Views:	1
Size:	77.4 KB
ID:	530518

  • #2
    Nice looking setup; well done
    Craftsman Colormatic AC
    Victor Journyman Setup
    Syncrowave 180 SD
    MM210 With Spoolgun
    Dynasty 200 DX
    Spectrum 625 Plasma Cutter
    Miller HD Tape Measure