Announcement

Collapse
No announcement yet.

Pass Port Plus

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Miller Kevin
    replied
    Pro,

    20 to 25 CFH should be all you need.

    Kevin

    Leave a comment:


  • Bulldog
    replied
    ProWork,
    Last week I got my 5th PassPort + and they all weld just about the same.
    When you startout with the PassPort + you'll need to start on the low side of the rrecommended settings. The little PassPort + has alot of power and I find the factory settings are kinda high. Also, when you adjust the machine, I have found that the adjustment knobs are VERY sensative. Each little click makes a big difference.
    Good luck,
    Bulldog

    Leave a comment:


  • ProWorkz
    replied
    Spool gun

    Kevin thanks for the reply. I picked up the spool gun two weeks ago. I plan on running my first aluminum beeds this week with the spool gun. What is a good flow rate for the Argon? Thanks.....

    Dave

    Leave a comment:


  • Miller Kevin
    replied
    ProWorkz,

    Congrats on the new machine The Passport is great little unit and really packs alot of punch for it's size. To set your machine up for aluminum you will need these items:

    Spoolmate 100
    1 lb spool(s) of aluminum wire
    A bottle of 100% Argon gas
    Regulator and gas hose for the Argon

    You may want to get some extra contact tips also.

    Kevin

    Leave a comment:


  • ProWorkz
    started a topic Pass Port Plus

    Pass Port Plus

    Picked up the Pass Port Plus last week. This week I want to get the spool gun for it. What all do I need to run aluminum on the Pass Port Plus? Spool gun, gas and wire? What type of gas for the aluminum?

    Thanks....
Working...
X