No announcement yet.

Getting closer to a full set

  • Filter
  • Time
  • Show
Clear All
new posts

  • Getting closer to a full set

    Hi guys,

    I've been doing some more work on the outdoor setting with renovations drawing closer to an end.

    now have 2x one seaters/side tables, and just finished the 6 seater table today.

    materials are 50x50x1.6mm stainless steel square tube, fully tigged and blended, with 90x19mm jarrah hardwood decking slats screwed directly onto angle bar supports, which are tacked to the frame.

    now i have to get working on some 2 seater benches to go with it and it will be a complete set for the new patio.

    on a side note, i've just ordered a makita lc1230 dry cutting chop saw with an 80T blade. i'm very keen to see how it goes on the thin wall stainless tubing i use- i reckon it's going to save me lots of time and give me more accurate cuts than my bandsaw can with it's bent and twisted cutting bed

  • #2
    Thats awesome looking.

    I really like the way you finished the corners with the mitered look.

    Fantastic job.

    Miller 211 A.S. and Spoolmate 100
    Stickmate LX 235 AC / 160 DC.
    Clarke 180 EN Just in case
    Spectrum 375 X-Treme.
    O/A Medium Radnor Torch, Large Victor Torch.
    Milwaukee 14" Chop Saw.
    4 x 6 Horizontal Band Saw.
    Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
    Jackson Passive shade #5 for the plasma.
    I almost forgot the Hobart XVP AD Hood.

    Projects and Misc Albums Feel Free to Have a Look ( Just keep in mind I am an amateur )


    • #3
      Beautiful work! I think if I had put that much TLC into those I'd have to keep them inside. I couldn't stand to see the weather get to my babies! You find a market for those and you could make a fortune.
      Millermatic 251
      Miller Syncrowave 200
      Miller 30A Spool Gun
      Hypertherm PowerMax 30
      Etc., Etc., Etc......
      Western Arkansas Welding


      • #4
        thanks gents,

        they are sort of indoors- it's a fully covered patio, thats about the most sun they get and only for about 1-2 hours a day.

        one of these days i might make a few pieces in my spare time and try to sell them but for now, work is keeping me busy enough


        • #5
          excellent work.

          you will like that dry cut saw.
          5x10 Bluco Fixture Table
          Cincinnati shear 10'x1/4"
          '11 Lincoln Power Mig 216
          '10 Syncro200 TIG runner
          Scotchman CPO 350 LT cold saw w/ AMS