32 ft gooseneck car hauler

[Ls2cam]

Please post with pixes after you done with your toy (32' Trailer) and name of your use paints on it...
Good Luck on your toy...

[Ls2cam]

Funny..True Wise and Saver$$$$
http://www.hotrod.com/techarticles/body/hrdp_0707_1962_ford_falcon_budget_paint_job/index.html[/URL][/QUOTE]

[2tay530]

there's a article about useing rustoleum to paint your car in the July 2007 isue of HOT ROD Magizine. they thined it with mineral spirits and rolled it on with a high density roller. there's a thread in the link bellow deticated to this method. looks like it worked prety well for $28.00 in paint.

http://board.moparts.org/ubbthreads/...=1#Post2655425

http://www.hotrod.com/techarticles/b...job/index.html

[Cram]

Christian,

http://www.bigtextrailer.com/trailers/goosenecks/thrdlev_gooseneck25gn.html

Paste the above link into your browser. It will take you to the bigtex gooseneck trailer area. It is very important, as you probably already know, to have the wheels far enough back to put about 15 to 25% of the weight on the goosneck hitch. If you click on the download PDF it gives you what looks like dimensions for how far to place the wheels back. One of the most dangerous things that I have ever done way back is building trailers with the axles to far forward and not putting enough weight on the hitch. It will cause dangerous fish tailing and when you put on the brakes to slow down it gets worse. The only thing you can do is let of the gas and ride it out. Anyhow that was with a small trailer built for quads. I now pull a 25' goosneck around with an 18,000 pound backhoe on it. If that trailer ever had a chance to pull up on the hitch it would take the back tires off the ground immediately, and soon after I'm sure I would be wrecking. The trailer your building looks great. I'm in the middle of putting a Flatbed on and F550. And I just got it where I can connect the goosneck and backhoe to it. It's really cool to know that I welded something that is pulling 23,500 lbs behind it.
Good Luck,
Marc

[welderman23]

dam skippy...
actually we use it on is exhaust systems for jet engine powered turbinegenerators

[dabar39]

I found the best thing to use on trailers (in my opinion) is good old Rustoleum Rusty Metal Primer and then use Rustoleum Gloss Enamel as a top coat. I've got some trailers that were painted four or five years ago that still look quite good. Easy prep, easy to spray, easy clean up, easy touch up and lasts quite awhile. Another plus to the equation is the price per gallon (about 25 bucks), the ability to mix custom colors and also the ease in which it is found readily available anywhere.

I can't really see any reason to spend high dollars on painting a piece of equipment that's gonna get used and abused on a frequent basis, every time you drop a chain on it or if the chains rub on it as you go down the road you are peeling money off of it. Me personally, I like my money and hate to waste it when not necessary. Just my opinion, nothing more. Dave

[welderman23]

When you start pricing paint you’ll just about faint! It’s absurd what a gallon of paint cost nowadays, must be a result of the EPA.

I’ve had real good luck with a primer called DP-40, almost bullet proof! You can use this stuff then a cheaper color topcoat.

I think you’ll be surprised how much paint you’ll waste painting something like that trailer.

yep... at work the paint we use is a two part mixture we get from sherwin-williams called macropoxy its stiff stuff. costs like 100 a gallon

[2tay530]

LOOOOOKING GOOOOD!!! nice work so far ceep it up. those are sone mighty fine looking cars you got in he back ground! Do I see TWO camaros! OOOOWEEE!!!

[aametalmaster]

Back when i painted those 500 trailers it was Dupont Centari Acrlyic enamel because we got it cheap being OEM. Today i would go to a farm store and buy their imp & tractor paint and some bare metal primer. The paint my local store has is made from Valspar paint company the same company that makes House Of Color paint. It has held up well on my wrought iron stuff in the yard...Bob

[Badd00SS]

What kind of paint should I use that would be most cost effective, longest lasting, etc. I have many sprayguns, so application wont be a problem.

Thanks guys.

[Badd00SS]

Looooooooking good so far!
What wire are you running?

Thanks

.035 Lincoln I think L-56 not sure.

[Badd00SS]

[Badd00SS]

Day 1 of the build....

[KBar]

I just received the steel for the 32ft gooseneck triple axle trailer I am going to build and I have a few questions. I have repaired many trailers, and built a couple small ones, but never built a 32 footer, so is there a formula for where to place the axles exactly?

I read somewhere one time that the placement of single axles is 60% of the trailer in front of the axle and 40% behind it. On a double axle trailer, you can use the halfway point between the two axles, a triple, use the middle axle. I hope this helps.

[Badd00SS]

One tip and i know you prob don't work by your car but, Don't let the grinding sparks hit your car glass because they don't come off they just burn in and rust in place....Bob

Found that one out when I used to work in a body shop, when I was 16, never made that costly mistake again.... That's not even my camaro, it's my fathers, swept out the garage so thats why its there