No announcement yet.

Drawing with my CNC

  • Filter
  • Time
  • Show
Clear All
new posts

  • Drawing with my CNC

    I decided I wanted to draw images of different sizes such as my clip art, which could be motorcycles, cars, any kind of designs which could be used as either wall hangings or banners. Also parts could be designed, printed on the paper and later someone could cut these out and use them as templates. My table can draw 49 in x 49 in without moving the paper. I made a holder for the Sharpie pen and mounted it to my tool holder and did the following drawing. The paper is 30 in wide. I thought you might enjoy watching it.

    Miller 252 Mig
    Miller Cricket XL
    Millermatic 150 Mig
    Miller Syncrowave 200 Tig
    2-O/A outfits
    Jet Lathe and Mill
    Jet 7x12 horz/vert band saw
    DeWalt Multi Cutter metal saw
    Century 50 Amp Plasma Cutter
    20 ton electric/hydraulic vertical press
    Propane Forge
    60" X 60" router/plasma table
    Vist my site:
    and check out some of my ironwork and other stuff

  • #2
    That is really neat. I have thought about aCNC table, maybe someday.


    • #3

      Thats pretty slick
      I've made a lot of templates out of 1/4" plywood to use with the plasma cutter by free hand drawing - that would sure be a lot nicer!