Announcement

Collapse
No announcement yet.

Work table - Outdoor/Removable

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lindley
    started a topic Work table - Outdoor/Removable

    Work table - Outdoor/Removable

    I wanted to gather some opinions on some work table(s). This may seem like a strange setup, but hear me out...

    I built a work shed in the backyard (8' X 12' enclosed; some overhang), but I do not like to run the miter saw or cutoff saw inside because of the dust unless the weather is real bad. I want to build some work tables that attach to the side of the shed and can be removed when they are not in use.

    The idea is to build two 6' tables that can be stored in a little walkway on the back side of the shed. When "deployed" the table legs would be in the grass of the backyard.

    I am not sure what materials to make them out of. I'm torn between square tubing or angle. I think the legs will be two sizes of square tubing, sliding inside one another, and adjustable with pins. They will fold up flat for storage.

    What about the top? What material? How wide? I might do some tack welding on them as well, but I know any serious work will result in warping.

    I am already "over-budget" on this shed, so think inexpensively, but still sturdy.

    Here's a Google Sketch-up of the shed. I just quickly added on a rough sketch of the tables:


  • vryndpndnt
    replied
    very interesting

    Leave a comment:


  • Donald Branscom
    replied
    Originally posted by NoogaD View Post
    I was thinking about a hinged work table. It would be a lot easier than moving tables in and out of your shed whenever you wanted to do something. Especially if you are like me and waaaaaay over do it and your welding table ends up weighing 700 pounds.
    I really like that heavy duty table!!
    Always an asset.

    Leave a comment:


  • Donald Branscom
    replied
    Originally posted by Lindley View Post
    By the way, my wife thought of hinging them to the wall so that I wouldn't have to remove them. That's not a bad idea either.

    This is a "starter home" for us, so anything I do in the backyard I will likely have to walk away from with little or no compensation when we go to sell. Just wanted to mention that.

    Here is a shot of the actual shed before I finished it:

    When my wife and i look at real estate we always want to see the garage or work shed. It is a big plus for creative people. Adds value to the home. What if you want to work at night without bothering a family member?

    I would not hinge the table to the shed. you may have a need to move the table out away from the shed for a project. And if you pound on the table it will rattle everything in the shed. And if you move you can take your tables with you. I would use square tubing and cap off the bottoms to prevent corrosion. A good steel table is always sellable too.

    Leave a comment:


  • umahunter
    replied
    hmm

    if your gonna go the fold down route a cheep way to add some fire resistance if you don't do a metal back drop is some concrete board used for setting tile its just that concrete on some mesh and pretty flame resistant you could put a track up and slide them in for use

    Leave a comment:


  • Joeman
    replied
    Originally posted by Jack Olsen View Post
    In my garage, I've got two work surfaces that fold down from the wall. One is a welding table and one is for wood work.

    Two nice things about a folding table attached to the shed would be 1) you can hide clamps and other tools behind the table when it's folded up, and 2) even a lightweight steel table is going to be so heavy you're never going to want to move it. I made my fold-down table out of a steel table that's made of 1/8" sheet on 1/4"x2" angle iron. Even that thin, it's much too heavy for one guy (or even two) to move very easily. Folding it down from the wall is do-able -- but I would need a hoist if I went to 1/4" or more for the surface.




    Yeah, those tables are just the Kind of thing I should have in my Garage! Wouldn't hurt to have the 'Car Too'

    Matter of fact, that car reminds me of my Friends 86' 911 RUF, except that yours has that much more of a 'classic look' to it.

    Cheers,

    Leave a comment:


  • Diverdude
    replied
    Click image for larger version

Name:	welding table 7.jpg
Views:	2
Size:	84.3 KB
ID:	511106My shop is rather small and not much room to work. Don't like gitting shavings everywere and sparks don't go well with flamable liquids so I built a movable welding table to take out in the yard.

    Leave a comment:


  • Lindley
    replied
    Thanks everyone for your suggestions. Now that I've seen your photos I really think the idea of fold down table is the way to go. I will do it on the back side of the shed under the awning. That is a slick setup with the clamps and tools hidden behind the table!

    I'll post some pictures and/or gather more ideas as this little project comes along.

    In the meantime, what do you think about materials? I was thinking 2" x 1/8" or 3/16" angle for the frame, 11 gauge (~1/8") or 3/16" for the top, and 2" square tubing for the legs.

    Any suggestions? Any further thoughts about stainless for the top?

    4' X 8' sheet prices:

    Carbon Steel
    11 ga - $73.45
    3/16" - $112.57

    Stainless
    11 ga - $370 (ouch!)





    For the record...
    Originally posted by Flyingpig View Post
    Reloading bench and sparks? I think Id relocate the loading bench.
    1) I never planned on welding or cutting inside my wooden floored shed
    2) I keep gun powder and primers in the house- climate controlled.
    Last edited by Lindley; 12-18-2010, 02:02 AM.

    Leave a comment:


  • Flyingpig
    replied
    Reloading bench and sparks? I think Id relocate the loading bench.

    Leave a comment:


  • Jack Olsen
    replied
    In my garage, I've got two work surfaces that fold down from the wall. One is a welding table and one is for wood work.

    Two nice things about a folding table attached to the shed would be 1) you can hide clamps and other tools behind the table when it's folded up, and 2) even a lightweight steel table is going to be so heavy you're never going to want to move it. I made my fold-down table out of a steel table that's made of 1/8" sheet on 1/4"x2" angle iron. Even that thin, it's much too heavy for one guy (or even two) to move very easily. Folding it down from the wall is do-able -- but I would need a hoist if I went to 1/4" or more for the surface.



    Leave a comment:


  • rgunn1
    replied
    I'm just down the road from you with a similar situation. Luckily, my shed has metal siding, so sparks are not ani issue. I consider my house a "starter home," so I just built my table small enough that I can take it with me if / when I move. The plan is to pour a slab underneath this winter, and fully enclose a small workshop off of the side of the shed. Anyway... good luck with it.

    Leave a comment:


  • Lindley
    replied
    Thanks for all of your thoughts and suggestions.

    This thread has really got the wheels turning.

    I pretty much have the shed finished, so I can't easily modify it much without changing the way I have it setup inside (tool storage, lawn tools, ammo reloading bench, etc.).

    Let me run something else by you that I didn't mention before and maybe we can come up with a way to kill two birds with one stone. On the back side of the shed, I have the overhang. I store a motorcycle parked closest to the shed and a riding lawnmower under the outside awning. All of it is on concrete. I have a gambrel set up above where I park the motorcycle that I use to hang and skin deer and hogs with. The plan has always been to install a fold-down stainless steel table along the back wall for processing the meat and also for cleaning fish.

    Maybe I could use this for both? I was under the assumption that it would not be a good idea to weld on stainless steel, but if I'm not concerned about the finish and I don't mind cleaning it up with a grinder or flap disk, would it hurt anything?

    I had a stainless steel beer keg near where I was welding and showered it with a few sparks from the grinder. I was surprised how the little iron flecks that landed on it rusted so quickly. So I am pretty sure the stainless fold-down table would undergo the same thing if used as a welding/tacking table.




    As far as welding splatter flying up against the shed, I could always cut a 4'X8' sheet into two strips (32" wide and another at 16" wide) and use the narrower strip as permanent "back-splash".

    Does all this seem crazy?
    Last edited by Lindley; 12-14-2010, 10:02 AM.

    Leave a comment:


  • mikeb9550
    replied
    Are you storing them in the shed

    I wonder if you are storing your tools in the shed? If so, I would build a shelf on a track system. Then I would have barn door style doors were you could also put some hand tools which would also be accessable outside. Have you ever seen the bed of a popup camper slide out? Should be plety strong enough. This way you dont have to keep setting your tools up. Just open the doors and slide your work area out. It would also open up your work area inside to give you room to move around. I would then extend the overhang to rain and snow doesnt bother you. I do my cutting and grinding outside for the same reason. I plan on doing a setup like this If I ever build a small dedicated workshop. I would have a big overhang. You can also put up a tarp or something to keep the cold wind off of you.

    Based on the way you have your door, you would have to do this in the back to give the track system enough leverage to support the weight. Make sure you use wheels in the track so its easy to slide.
    Last edited by mikeb9550; 12-14-2010, 04:39 AM.

    Leave a comment:


  • NoogaD
    replied
    He could have the table hinged and also have a piece of sheet hinged that would flip up and bolt to the wall so that sparks wouldn't damage the building.

    Leave a comment:


  • triptester
    replied
    I would try to keep the work bench detached from the building because the sparks from a cut-off saw or welding will damage the wall finish.

    Leave a comment:

Working...
X