How to TIG weld Stainless Nuts

[izakto]

I'm new to TIG welding and I've been having trouble when welding stainless steel nuts, the threads change size and the bolts will not thread into the nuts. I would greatly appreaciate any tips anybody can give me.

I hope is not too much to ask.


Thank you,
Izakto

[El Guanche]

I did the same thing for the past few days and had to grind some of them down an re do the whole thing. I was welding some ss nuts to a part and I set my tig at 65 amps for a 1/4 nut.

Used the red band tungs and shrped them needle point aimed well at the bigger part and when it melted a little moved to the base of the nut doing one flat side at a time and leaving it to cool a minute.

Still need to cleanthe thread a little with a tap.

[izakto]

Thanks for the Tip

Thanks for the tip. Tonight I'm going to try this out.


Thank you greatly,
Izakto