Announcement

Collapse
No announcement yet.

homebuilt tig cooler?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sundown
    replied
    Originally posted by link523
    how many gph sould the pump flow i found a 15gph procon pump on ebay will this be big engough
    You should pump about 1.25 qt/min at about 50 PSI.

    Leave a comment:


  • link523
    replied
    how many gph sould the pump flow i found a 15gph procon pump on ebay will this be big engough

    Leave a comment:


  • Charlie C
    replied
    Link there was a fellow on the Home Shop Machinest sit that built one for his tig. The last pic that I saw, it looked like a real well thought out and made unit.

    Leave a comment:


  • link523
    replied
    if you could please send them to me thanks

    Leave a comment:


  • Bighead
    replied
    Link,
    Do not buy the plans from e-bay waste of money! I have bought the plans and you or any one can have a copy just e-mail me at [email protected].

    Leave a comment:


  • link523
    replied
    i have a procon pump but its shot was think of getting a pond pump from the home center and a 5 gallon bucket with a lid!!!!!!!!

    Leave a comment:


  • TJS
    replied
    Do a seach on cooler. You will find many posts and pictures on this. HTH.
    T.J.

    oops, that is on the miller motorsports board by the way,
    Last edited by TJS; 04-03-2006, 06:53 AM.

    Leave a comment:


  • Sundown
    replied
    Here is a link to an article in the Fabricator Magazine on the one I built the parts http://www.thefabricator.com/ArcWeld...le.cfm?ID=1275 list and pictures are on the Miller "Ask Andy" forum, and also on the Hobart "Weld Talk" projects forum, if you want to search for it. I would not recommend a fountian pump for a cooler build, you can find procon pumps on ebay a lot cheaper than $250, I bought a used one with a new 120V fractional motor for $45 from some guy.
    Last edited by Sundown; 04-02-2006, 08:07 PM.

    Leave a comment:


  • link523
    started a topic homebuilt tig cooler?

    homebuilt tig cooler?

    any make a home built tig cooler? i see the plans for sale on ebay was wondering how well they work! i have a miller 330a/pb with a weldcraft 20 serie torch it machine can with a benard cooler cart tank is rusted very bad and pump is shot a replacement pump is $250 i seen someone use a back yard fount pump what do you think
Working...
X