Tweet
does anyone have plans for oxy/acet hose reel for welding rig
-
-
If you build one make the inside dia. large, so you will make less turn to wind up the hose.
Good Luck,
BobMillermatic 252 w/30A
Big Blue Air Pak
Ellis 3000 Band Saw
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
Spectrum 625 X-TREME
Lincoln SA-200 Blue Tint Red Face '63
2-Lincoln SA-200 Red Face '68
SA-200 Black Face '59
SA-200 Green Lite '84
SA-200 Green Lite '80
SA-200 Red Face '69
SA-200 Red Face '66
SA-200 Green Lite '81
'70 Black Face Round Barrel -
Do you see the word "Search" near the top of the page?Originally posted by cdw View Post
There have been a few different posts on the subject so I'm sure you should find something to get you started.at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin SOLD
2008 Suitcase 12RC
Spoolmatic 30A
WC-24
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Sold:MM130XP
Sold:MM 251
Sold:CST 280
at work:
Invision 350MP
Dynasty 350
Millermatic 350P
Retired:Shopmaster 300 with a HF-251Comment
-
Cable reels
cdw,
I don't have plans, but here are some photos of some cable reels. possibly you can build yours from the photos. Since these are cable reels, you'll notice one is insulated from the stand.
http://billswelderrepair.com/parts-page.html
http://www.auctiva.com/hostedimages/...rmat=0&lgdin=1Comment
-
i bought a hand crank air hose reel, put quick dis-connects on the ends, left about 10 foot attached to the bottles, then roll out what i need, connect and go..... unhook and roll it up.... simple and effectiveComment
-
I made one from a fire hose reel. I have a short length of hose to connect the reel to the tanks.
It's not the roll out while connected type, but it cost next to nothing & works quite well.
So you're telling me...You're not nostalgic? Then, give me another word for it......Comment
Comment