No announcement yet.

Corpus Sculpture

  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Corpus Sculpture

    That is striking! It will be gazed at with appreciation, dude.
    Professional firefighter (retired). Amateur everything else I try to do...
    Oh yeah: GO BIG RED!


    • #17

      Like Cornerstone said I was deeply moved.
      Good Luck,
      Millermatic 252 w/30A
      Big Blue Air Pak
      Ellis 3000 Band Saw
      Trailblazer 302 Air Pak w/ Wireless Remote
      Dynasty 200 DX
      XMT 350 MPa w/S-74 MPa Plus
      Millermatic 211
      Passport Plus
      Spectrum 625 X-TREME
      Lincoln SA-200 Blue Tint Red Face '63
      2-Lincoln SA-200 Red Face '68
      SA-200 Black Face '59
      SA-200 Green Lite '84
      SA-200 Green Lite '80
      SA-200 Red Face '69
      SA-200 Red Face '66
      SA-200 Green Lite '81
      '70 Black Face Round Barrel


      • #18
        Jesse and Josh- Fancy Meetin you here!!! I am impressed by your work Sir! That is pretty darn neat and It will be cool to be able to say "I know the guy who made that" for many years to come!!

        Take care fellas!

        T-4 Paraplegic, Runnin' the Pedal With my elbow, now trying to get used to a momentary switch.......

        Journeyman Millwright, Local 1102, Detroit, Michigan (Disabled)

        Syncrowave 200
        Coolmate 1


        • #19
          Fabrication Complete!

          Just Finished the Fabrication of Jesus! Now Spraying with 3 to 4 coats of automotive clear coat (1st coat applyed in 2nt pic). Then installation. I will Post pics when installed! And Thanks for all the Comments and feedback! I am still New to the welding feild and I learn a Lot from reading this message Board!

          Last edited by jessehornberger; 08-03-2010, 01:33 PM. Reason: Thank You!
          Miller Syncrowave 200
          Miller Spectrum 875 Plasma Cutter
          Miller Milermatic 135
          Ridgid Drill Press
          Ridgid Chop Saw
          36" Metal Break
          Harris Toarches
          English Wheel
          Ingersoll Rand, 18.1 cfm Compressor
          30 gal. Sand Blaster
          Planishing Hammer
          150lb Anvil
          10" Swing Logan Lathe


          • #20
            very good! im impressed!
            Anything you could do, I could do better.
            I can do anything better than you!
            Lockheed Martin
            Armco Steel, Baltimore
            USW local #3185