8"x8"x7' I Beam For Sale Or Trade

[MYBOYDAVE]

8"x8"x7' I Beam For Sale Or Trade
Let Me Know What You Have To Trade
Or What You Want To Pay
Brand New Beam
RIDGEFIELD PARK NEW JERSEY

[MMW]

Look up steel suppliers near Edison, NJ. Try Samson Metals or Metals USA.

[Tinu]

Need one W8X48 load bearing steel supporting beam about 18 feet long in Edison, NJ

Need on W8X48 load bearing supporting, 18 feet long + bearing to be delivered in Edison, NJ

[m.k.swelding]

I hevent seen a solid price tag yet.

[Bodybagger]

Nominal 8" flange width could be 31-67 lbs per ft.

W8x31
W8x35
W8x40
W8x48
W8x58
W8x67

Not very specific, is it?

[willy]

I have a piece like that with a vise on one end and a notcher on the other. Also if someone was looking to build a log splitter or a small gantry that would be perfect.

Funny you should say that - just started looking last week for some to build a gantry to pull a cab and pickup box off of a frame. Too bad it's half a country away.....

[chrisa7164]

I have a piece like that with a vise on one end and a notcher on the other. Also if someone was looking to build a log splitter or a small gantry that would be perfect.

[SundownIII]

Short lengths of I-Beam such as this are great for making heavy duty horses.

Weld a couple lengths of channel on and use angle iron for the base and you're good to go.

I have a couple that I use all the time for mounting a vice, a tubing roller, a pipe bender, etc. One is the same height as my welding table, which works great for larger pieces.

Not useless, but reallly doesn't have much "commercial" value. I get my beams out of my buddy's scrap dumpster (runs a large fab shop).

[Showdog75]

7 FT WHATS IT ANY GOOD FOR..GARBAGE,GIVE IT AWAY...

If you had to buy it you wouldn't consider it garbage. Fwiw I bought a 12' 8" 24 lb. per ft beam and it was $135 . A new 20ft 8" 24 lb per ft was $270.

[bassgrinder]

8"x8"x7' I Beam For Sale Or Trade

I also see you up near NYC do you have a good way to ship to S. Jersey?

[bassgrinder]

8"x8"x7' I Beam For Sale Or Trade

I take it this is "W" or wide flange beam, do you know what the lbs/ft is? If not can I can get the thickness of the flange and the web?
Thanks

[MD Welding]

Where are you and the beam located?