Tweet
welding table- 4 ft x 4 ft, 3/8 in thick
-
Matt
Syncrowave 200
Thermal Dynamics Cutmaster 52
Victor O/A
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
Speedglas -
Nice looking table. May I ask what size adjusters did you use on the legs?
Miller 211 A.S. and Spoolmate 100
Stickmate LX 235 AC / 160 DC.
Clarke 180 EN Just in case
Spectrum 375 X-Treme.
O/A Medium Radnor Torch, Large Victor Torch.
Milwaukee 14" Chop Saw.
4 x 6 Horizontal Band Saw.
Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
Jackson Passive shade #5 for the plasma.
I almost forgot the Hobart XVP AD Hood.
Projects and Misc Albums
http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur ) -
tig torch holder- trying to practice aluminumMatt
Syncrowave 200
Thermal Dynamics Cutmaster 52
Victor O/A
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
SpeedglasComment
-
just 3/4 in bolts w/ nut welded on bottom of leg and second nut to lock it in placeMatt
Syncrowave 200
Thermal Dynamics Cutmaster 52
Victor O/A
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
SpeedglasComment
-
Nice design on the TIG torch holder. You might want to weld some angle supports between those legs. Stiffens it up and gives you a great place to store clamps and magnets.DAVE Dynasty 200DX with Coolmate 3
Millermatic 212 Auto Set
Millermatic 140 Auto Set
Hobart Airforce 400 Plasma Cutter
JD2 Tube BenderComment
Comment