welding razor blades

[littlefuzz]

I saw there wasn't any thread on here yet about welding razor blades togather so I figured might as well start one. here's one I done, it's pretty easy. I was using the syncrowave at work, i can't remember the amps

[wireburner]

my cousin showed me that that is cool

[fun4now]

those are not razor blades, there much thicker than real razor blades.
but thats a nice weld.

[littlefuzz]

those are not razor blades, there much thicker than real razor blades.
but thats a nice weld.

Picky picky. Dam, I'll try to get some real ones and try again

[jjsjeff]

Is there a particular use for this or are you just proving you can?

[fun4now]

yep its a just to show i can kind of thing. just like welding the 2 beer cans togather for aluminum can do thing.

[dabar39]

Are those actually welded together with filler rod or just fused together? Dave

[monte55]

those are not razor blades, there much thicker than real razor blades.
but thats a nice weld.

The fact that he welded the thin edges together without burning holes through them is a feat in itself..........good job

[fun4now]

not saying it isent a good job. just thought i would throw out the not realy razor blades nicely befor some one did it much ruder. as has happend in the past. nothing against the weld.

[TS-Off-Road]

The fact that he welded the thin edges together without burning holes through them is a feat in itself..........good job

With the right machine, it's actually quite easy.

Now do it with an Acetylene torch, that would be impressive!

[monte55]

With the right machine, it's actually quite easy.

Now do it with an Acetylene torch, that would be impressive!

Everything is easy if you know how

[fun4now]

i dont think i have a small enough tip, but i might give it a shot next time i get out to the shop with a few sec. to spare.

[phila.renewal]

Try doing that while using filler.

It's a little harder but good practice and kind of fun.

[cncworks]

practice

i think i'm going to go and dig some lawn mower blades out of the pile and practice welding them together! does that count??

thats about my skill level

nice welding on the razors!!

[HMW]

Lawnmower blades

Ha Ha....you could weld them together with a rosebud tip