Announcement

Collapse
No announcement yet.

project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • JohnT
    started a topic project

    project

    Here is one of my project.Click image for larger version

Name:	IMAG0001.jpg
Views:	1
Size:	157.2 KB
ID:	525953

    Click image for larger version

Name:	IMAG0006.jpg
Views:	1
Size:	187.8 KB
ID:	525954

  • JohnT
    replied
    Project

    Hey chuck, yes the hoist is done the picture that shows the jack is one that i took when i first position the jack. The jack is secure by the tention of the table. I will take another pic. to show how I plase the jack. I did it this way so i can remove it any time that the jack may go bad. the table stand about four feet high and about six in. on the lower positiom. thanks JohnT.

    Leave a comment:


  • Chuck U&R
    replied
    Looks good so far.

    Are you going to add some type of locking mechanism to hold it up in case the jack fails ?

    How high is it when it's all the way up ?

    How high is it when it's lowered all the way down ?

    Leave a comment:


  • JohnT
    replied
    project

    Hey davedarragh,I don't know how mouch it weighs. it is kind of hevy, two pepple can put it on it's side. And as long i dont have my bike on it i can move it oround fearly easy. i realy dont have mouch money in to it sence all the material were from scrap metal that i colected, the onley money i got was on the bottle jack. to every one thanks for the reply John T.

    Leave a comment:


  • fun4now
    replied
    looks great.
    another reason having a welder around is always good.

    Leave a comment:


  • davedarragh
    replied
    "Lift Table"

    JohnT: That's slick! Hey, how much do you think it weighs, and is it pretty easy to move around? Can you lay it on it's side when not in use to save space?

    Dave

    Leave a comment:


  • bob_e95482
    replied
    Good for you! I started a table lift 4 or 5 years ago. I have almost no money into it, but I bought a handy lift clone on Craigslist for $400. I don't know if I'll finish the one I started.

    Leave a comment:


  • JohnT
    replied
    project

    It's a lifting hoist that i use for working on my bikes, or i use it as a welding table.

    Leave a comment:


  • Don52
    replied
    Nice looking MIG welds. What is the lift table for?

    Leave a comment:

Working...
X