New Jacket,gloves,doo-rag

[wireburner]

I ordered a new jacket, gloves, doo-rag from E-Bay it costed about $28 with tax, shipping , there are the Black Stallion Pack here is a link to it I ordered the All- American Packhttp://www.revcoindustries.com/catal...AT%20flyer.pdf should be here soon

[wireburner]

any of y`all know where I could get 1 of the t-shirts?

[Bert]

Those clothes would look CUTE on a little boy
Ok...I have GOT to stop teasing you about your age
just jealous!!!!!!
Looks like you have to order the shirt seperately...

[wireburner]

haha very funny hey you know I ain`t the only 13 year old who welds on here Shh(Weld_13 is 13)Shh

[weld_13]

haha very funny hey you know I ain`t the only 13 year old who welds on here Shh(Weld_13 is 13)Shh

hahaha way to spill the beans..... .lol jk . Nice deal on the jacket and stuff. Need to get some new gloves really soon cause my old ones are definetly falling apart and i might get a jacket with them

[wireburner]

my gloves have holes in the finger tips can`t wait for my new ones

[Bert]

hehe....good, now I'll lay off you and start on weld13

[weld_13]

000000000000oooooooooooo! So now u think ur better than me huh? Were takin this to the weldin shop .hahajkjk I have shown up a lot i mean a lot of men while i was weldin but im not so shure how i can do against the pros . The guy who is a retired pro(my teacher) said im the best hes ever seen for my age but i dont know.....

[Bert]

Lucky I'm just starting and I'm not a pro, so we're probably even...
A 13 year old saying he's better than most "men."
Hmmm...sounds like a 13 y/o with a big ego, and sounding like a typical 13 y/o!!!
Put your money where your mouth is!!! We'll start simple:
1) 2 metal plates, and do a weld with 6011 = flat (some people say its Horz)
2) 2 metal plates, vertical up

plates gotta be 1/4" - 3/8" thick, at least 6" x 2"

Let's start with that...no rush, I can't do mine till next weekend. I got Union classes all day tomorrow, then painting dad's house on Sunday, then back to work...do you know what work is???

[weld_13]

I didnt say i was better than most i said the guy who helps me said i was the best he had seen for my age. Im gonna have 2 get some more 6011 brother used it all and claimed to replace it. Im not so shure hes goin to tho. Ill see wat i can do ill take your bet even tho ill probly lose but gotta stay possitive. hehe

[weld_13]

I will have 2 see about the vertical welds because i dont have a welding table and usually use my grandpas but havin family issues . I could use the top of the table saw but dont think dad would be too happy about the slag .

[Bert]

yeah...put slag on your dad's table saw, and we won't see you on this board, till your 18 and out of the house Do you have a small 2'x2' piece of steel you can get as a table, put it on 2 sawhorses and make a table?
Like I said, no rush! Oh, and if I remember correctly, you said you were probably better than Mac, Dabar, fun4now and wireburner hands down!!!
LOT of ego for a 13 year old!!!!!!!!!!!!!!!!!!!
bert
p.s. let's see if putting words in your mouth gets you in trouble !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[dabar39]

better than me???

Oh, and if I remember correctly, you said you were probably better than Mac, Dabar, fun4now and wireburner hands down!!!
LOT of ego for a 13 year old!!!!!!!!!!!!!!!!!!!
bert
p.s. let's see if putting words in your mouth gets you in trouble !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



Bert, You never know he may be a naturally gifted person with outstanding abilities. Me personally, it's taken the better part of my 43 years on this planet to acquire the knowledge and abilities I have gained to this point. Do I know it all, Heck no, I learn something new everyday I wake up or go to work.Am I the best at what I do? heck no. I am good at what I do, and I do what I'm good at.

There are a lot of better "weldors" than me but that's O.K. cause I call myself a fabricator more than a welder anyways. Welding is only a very small part of what I do, Dave
P>S>
weld 13 if you go to one of my personal web pages and look at a few projects I have done and still think you can give an old man a run for the money, bring it on. LOL go to www.bellsouth.net and scroll down to personal web pages and mine is +++++utility trailers by weldintorch

[Bert]

Dave, yes, it IS possible that he may be naturally gifted,that will only make me MORE jealous What took me 3 weeks in class, the 20y/o's did in 3 hours.
Then they would go and smoke dope instead of practicing more...Tortise and the hare...I may be a hare, but hey...I won

Weld13...I'm not sure if Dave knew I was putting words in your mouth or the thinks you private messaged me telling you were better (which you didn't), I just thought it might be a fun way of getting you in trouble
Now, step it up kid, 'cause you have some shoes to fill!!!!!

[fun4now]

where's the golden fiddle???

i'll take your bet, your gunna regret, cuzz i'm the best thats ever been.
man i suck at stick.
but i'm still working on it, can i cheat and TIG it and just pretend it was 6011.