Announcement

Collapse
No announcement yet.

Rotisery < Not for cooking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rotisery < Not for cooking

    My good ole Dynasty 300 DX, and I had some time the other day. So between the 2 of us we fab'd up some steel and built a nice little rotisery. Its not as fancy as some others. But it does everything I need it too.

    Casters are Faultess, 6" ones at the corners and 4" ones in the middle. The are all roller bearing, with grease zerks at the wheel bearing, and at the swivel. Rated for 900lbs each.

    MM 130 110v Mig
    Spectrum Cutmate 300 110v/240v Plasma
    Syncrowave 250 Tig, oldie but welds nice
    Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time

  • #2
    Nice job my friend!!
    You can fix anything from a "Broken Heart to the Crack of Dawn" if you have the right tool's

    Comment


    • #3
      Nice job , I built a set so we could work on a freinds Nova . The ones I built are were built to do more than cars .
      Tools to Men are like Shoes to Women you can never have too many .
      Miller XMT-304
      Miller Spectrum 2050
      Miller 10-E Feeder
      Hobart 175 Handler
      Lincoln AC225
      And assorted others

      Comment


      • #4
        Could use a good coat of paint. Good job!
        Save our species! Lower metal prices!

        Comment


        • #5
          I don't fancy paint much. When the car gets sand blasted , I will blast the stand and send it out for powder coat. Its uncany but the Powder coaters have a blue <star blue> thats SOO close to miller blue. My benches are miller blue currently. But it was too much work to paint, when you don't have a proper booth set up.
          MM 130 110v Mig
          Spectrum Cutmate 300 110v/240v Plasma
          Syncrowave 250 Tig, oldie but welds nice
          Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time

          Comment

          Working...
          X