Announcement

Collapse
No announcement yet.

Evolution Cold saw

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Desertrider33
    replied
    Originally posted by Blondie_486 View Post
    If you don't mind my asking what did your Airgas dealer sell you your Rage 3 for? I got a quote today on one and wanted to see if it is in line with what you paid or if they're too high.
    Sorry I didn't see your post untill today. I paid about $300 with tax for my Rage 3 at Airgas.

    My Rage 1 was about $150 at Airgas.
    Last edited by Desertrider33; 01-10-2010, 12:29 AM.

    Leave a comment:


  • Blondie_486
    replied
    Originally posted by ormachine View Post
    If i remember correctly, my LWS quoted 259.00 for the Rage 3.

    Blondie, is that close to what you paid ?

    Ron
    I paid 272.00 for mine. So that's close I guess it depends on how close you are to Iowa where they are shipped from. Perhaps your welding supplier got a better shipping rate. I had mine within 2 or 3 days of ordering though.

    Leave a comment:


  • ormachine
    replied
    Price on Rage 3

    If i remember correctly, my LWS quoted 259.00 for the Rage 3.

    Blondie, is that close to what you paid ?

    Ron

    Leave a comment:


  • Blondie_486
    replied
    I got my Rage 3 today and all I can say is I'm glad I didn't buy an abrasive wheel saw!!! It works great and can't believe the clean cuts on both steel and aluminum. My local Airgas dealer didn't know anything about the Evolution product line till I inquired and then had to have Evolution contact him. He's thinking of stocking their saws now, as he was as impressed as I was with the quality of cut with the saw.

    Leave a comment:


  • Blondie_486
    replied
    Originally posted by Desertrider33 View Post
    My local Airgas has the Steelmax saw on display. I looked at it and saw the 'made in china' label and lost all interest in it.
    If you don't mind my asking what did your Airgas dealer sell you your Rage 3 for? I got a quote today on one and wanted to see if it is in line with what you paid or if they're too high.

    Leave a comment:


  • fendermender
    replied
    Originally posted by Jack Olsen View Post
    That's because -- like a true amateur -- I tried running cold-cut blades on my 10-inch miter saw, and wasted an expensive blade pretty quickly.

    But hopefully others can benefit from my mistakes.

    After that, I found a Milwaukee 6190-20 14" cold saw on ebay for $279 (with no blade) and have been using the (~$40) Freud Diablo blades with it since then.

    Many hundreds of cuts, and I'm still on my first blade.
    Totally thanks to this thread, I was looking to replace my 19 year old Black and Decker chop saw...
    I just took posession of the Milwakee 6190-20 and I very am pleased!
    E-bay the only way! No tax- no shipping.
    Handed down the old chop saw to a friend.
    He will need to replace a dry rotted cord and some brushes.
    The new saw doesn't throw flamable sparks, but only chunks of cut material.
    Seems to cut steel like butter.

    Leave a comment:


  • m.k.swelding
    replied
    It looks cheapley made.

    Leave a comment:


  • Shamrock1123
    replied
    I purchased my Evolution saw from TrickTools.com 2 years ago. They had great pricing, Free Delivery, and no sales tax. I recieved it in less than a week. It has been a great saw and I have had no problems with it.

    Leave a comment:


  • jimmy_pop
    replied
    i just google'd Dake cold saws, drool !!!

    Leave a comment:


  • SavageSunJeep
    replied
    Regardless of your stand on buy American, let me just say a few things about Chinese made goods.

    They like most products in life come in lousy, good, better and great.

    The outcome depends upon (in this case) the stateside company that contracted to have the products made. Nowhere does the old axiom scream louder than dealing with the Chinese...'trash in - trash out'.

    Don't spec CHRMO then expect cast iron, fail to spec T-6 then don't be surprised when it made out of alum beer cans, don't spec tolerances to .0001 and chances are it will be closer to 1000.

    The Chinese can and do excellent high quality work but the onus is on the company here to spec it and even MORE importantly INSPECT, INSPECT, INSPECT.

    Any company that calls up some Chinese broker and orders up 10,000 widgets for .10 cents each and then tells the boss that he just saved $10.00 bucks on each widget will get EXACTLY what they pay for.

    Sure $ can be saved but expect to go on a hiring binge to fill your engineering QC ranks and spend a lot of bucks for folks to travel to China to insure product = American made and customer expectations.

    This leads us the the second axiom...'cheap don't come good and good don't come cheap'...


    I was in a fab shop several years ago to get some work done. There was a rather large sign posted that said:

    To our customers. You can have it:

    CHEAP

    FAST

    GOOD

    Please pick any 2 and let me know, thanks, David, Manger, FabWerks.

    Leave a comment:


  • Blondie_486
    replied
    I called Evolution today to see if there were any dealers in my area who might be stocking the Rage2 saw. Unfortunately while there are several dealers in my area including Airgas none stock the saws. I also asked the rep where the saws were made and he told me that they are made overseas. I asked him overseas as in Europe or Asian countries? He said they are mostly made in China.

    Kind of burst my bubble as I was looking for a non China produced product. Perhaps it's time to look to my industrial surplus dealer and buy a used band saw and give up my floor space rather than give the Chinese my hard earned money. I know Dake makes a cold saw that will operate on single phase power but again where are they built and I'm sure it's going to be well over a grand and most likely approaching two grand.

    Leave a comment:


  • crawdaddy
    replied
    Besides the fact of destroying a blade when used in a chopsaw designed for wood cutting, Putting a cold saw blade on a regular saw could be a potential safety hazard, For instance if the blade bound on a miter cut you might be on the recieving end of some high velocity fragments.Mike

    Leave a comment:


  • Jack Olsen
    replied
    That's because -- like a true amateur -- I tried running cold-cut blades on my 10-inch miter saw, and wasted an expensive blade pretty quickly.

    But hopefully others can benefit from my mistakes.

    After that, I found a Milwaukee 6190-20 14" cold saw on ebay for $279 (with no blade) and have been using the (~$40) Freud Diablo blades with it since then.

    Many hundreds of cuts, and I'm still on my first blade.

    Leave a comment:


  • SavageSunJeep
    replied
    Originally posted by Jack Olsen View Post
    Unfortunately, no. You need a low-rpm motor for the metal-cutting blades -- like 1400 rpm. At normal chop saw speeds, the blades just overheat and lose their edge.
    Jack, answered like a true professional...You gave me a Yes or No answer and then told me why or why not.

    THANK YOU...

    Leave a comment:


  • Jack Olsen
    replied
    Originally posted by SavageSunJeep View Post
    Question: Can I get a good quality metal cutting 14" blade for my DeWalt and just chug on down the road?
    Unfortunately, no. You need a low-rpm motor for the metal-cutting blades -- like 1400 rpm. At normal chop saw speeds, the blades just overheat and lose their edge.

    Leave a comment:

Working...
X