Announcement

Collapse
No announcement yet.

Need ideas for welding table

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FABRAT
    replied
    Pictures....Bout time hu!!

    Here are some pics of my table...not great ones but they are what i have...the shelf with the toolbox on it isnt in place now but it fits right up under the top and i am still working on a design to lock the foldup extensions in place. also the lifting plates are non existant as of this point...as you can tell by all the crap on the table it is in use instead up under construction. the other pics here are of a concrete form i am building for my company. i am building two of them. they are 2X2X6 and they are poured on their side an the block is tipped up after it cures. the two L shaped halves of the forms fit together with the two tabs on each end and then wedges are pounded in to lock the form together. we have two of these forms already and i am building two more. the blocks made in the forms are made from extra concrete brought back from jobs. the blocks stack and lock together. i will keep you posted on the progress of these with pics and explaination. once they are done they will be easier to understand.

    FABRAT
    Attached Files

    Leave a comment:


  • Pitalplace
    replied
    Also another angle. I like a short table, 18" to 24" with a short stool. This way you can set with your feet on the floor and can reach taller projects on the table. A friend has his this way and I guess I just got use to it. He also used the heavy grating on his table instead of sheet stock.

    Leave a comment:


  • Jordanste
    replied
    yeah i am a visual man also. i cant wait for the pic's of that table you built.

    Leave a comment:


  • WeldTeach
    replied
    Originally posted by SNUNEZ
    HelloIve been welding for a few years and I have built several tables all are about 32 inches high
    the best thing I have built onto them is a sliding tool holder on all 4 corners this is a tube inside a tube that makes the table frame
    I slide it out to hold my Lead or Vise Grips or C clamps
    when I need it when not needed I slide it in hidden from view and also doesnt interfere with top of table, these sliding tool holders also serve as a torch table when I slide them and locate a piece across both of them so slag will fall to floor.
    I also have a shelf at about 10 inches from floor for fixtures and a smaller one about 6 inches from top for grinder or other tools
    I will post a pic as soon as I can remember to take it with me to the shop
    also I have an air hose hanger next to my blue print table and on the other side I have Oxygen acetylene bottles with a hose and torch holder"
    the hose reel is on a stand and it also hold my 4 1/2 grinder on a piece of 4 " channel
    keeping out of the way hope I helped you some what
    Santiago Nunez
    Sounds like cool ideas. I'm a "visual" guy though...I'd like to see some pics!!

    Leave a comment:


  • fyoung
    replied
    Sliding tool holder

    Originally posted by SNUNEZ

    the best thing I have built onto them is a sliding tool holder on all 4 corners this is a tube inside a tube that makes the table frame
    I slide it out to hold my Lead or Vise Grips or C clamps
    when I need it when not needed I slide it in hidden from view.
    Santiago Nunez
    I'm glad you shared this..I really like the sliding tool holder idea. I'm planning on building a new table this spring and I'll pencil this into the sketch.
    Thats what's nice about these forums..you can get all kinds of good ideas from fellow members that already have something you're needing adeas on.
    Thanks again, Farris

    Leave a comment:


  • SNUNEZ
    replied
    Welding Table

    Originally posted by WeldTeach
    I've found 32-33" to be a pretty common height for tables. We just built a couple 4'x8' tables for our school shop out of 1/4" top plate, 4" channel (1/4" wall) for the frame/crossbraces and 4" x 4" (10 gauge) for the legs, plus 1/4" plate for gussets on the legs. We also welded on HD braking casters so we can move them around the shop. Seem to work well and heavy enough for our use. May someday through another 1/4" plate on top...but not anytime soon...I'll see if I can dig out the digital camera and snap some pics soon..
    HelloIve been welding for a few years and I have built several tables all are about 32 inches high
    the best thing I have built onto them is a sliding tool holder on all 4 corners this is a tube inside a tube that makes the table frame
    I slide it out to hold my Lead or Vise Grips or C clamps
    when I need it when not needed I slide it in hidden from view and also doesnt interfere with top of table, these sliding tool holders also serve as a torch table when I slide them and locate a piece across both of them so slag will fall to floor.
    I also have a shelf at about 10 inches from floor for fixtures and a smaller one about 6 inches from top for grinder or other tools
    I will post a pic as soon as I can remember to take it with me to the shop
    also I have an air hose hanger next to my blue print table and on the other side I have Oxygen acetylene bottles with a hose and torch holder"
    the hose reel is on a stand and it also hold my 4 1/2 grinder on a piece of 4 " channel
    keeping out of the way hope I helped you some what
    Santiago Nunez

    Leave a comment:


  • burninbriar
    replied
    Originally posted by FABRAT

    i am also considering a HF compact bender which is on sale for $49.99 on the net right now and adding the scroller attachment...i know that the scroller takes a little work to get opperable but the SO one is out of my range for now but i was wondering if anyone had anything to say about the HF compact bender (pos or neg) any coments would be appreciated.

    Thanks again and weld on ! Nick
    I have one of those benders and its not bad for what it is. The scroll bender is designed to use 3/16 material and wont acsept any thing thicker and thinner material is dificult to use in the scrroll attachment. There is a slot that you put youre metal in and any thing over 3/16 wont fit and any thing under 3/16 slips out unless you shim it up. But it does a nice enough job on the 3/16.

    Leave a comment:


  • lgjhn
    replied
    Originally posted by Sundown
    I built mine at 35-1/2" tall, I am 5'10-1/2" tall and it seems to be just right for me when I am standing. I did need to add an extension to my stool as it was a bit short, that made the foot remote just reachable. I thought about a reciever and I have one that came off my truck, but I decided aginst it as my bench bender is mounted on a 3" thick maple block workbench that is 15' long and lagged to the floor and the wall. I havn't done any threaded holes yet as I have not used the table enough to know where they should be drilled. I have 5" casters bolted to plates that are welded to the bottom of the legs that are drilled to lock in all four directions, as I won't be putting any sideways tourque on it, and the weight of 300 lbs, that seems enough so far. After I use it more I may want to add some drop down bolts for more stability.

    George,
    That 35-1/2" height is from the floor and not the castor plates, right?
    Thanks,
    LJ

    Leave a comment:


  • Sundown
    replied
    I built mine at 35-1/2" tall, I am 5'10-1/2" tall and it seems to be just right for me when I am standing. I did need to add an extension to my stool as it was a bit short, that made the foot remote just reachable. I thought about a reciever and I have one that came off my truck, but I decided aginst it as my bench bender is mounted on a 3" thick maple block workbench that is 15' long and lagged to the floor and the wall. I havn't done any threaded holes yet as I have not used the table enough to know where they should be drilled. I have 5" casters bolted to plates that are welded to the bottom of the legs that are drilled to lock in all four directions, as I won't be putting any sideways tourque on it, and the weight of 300 lbs, that seems enough so far. After I use it more I may want to add some drop down bolts for more stability.
    Last edited by Sundown; 02-09-2006, 06:34 AM.

    Leave a comment:


  • Firey
    replied
    Weld table

    I have 7 welding tables in my shop all are 4'x8'x36" tall it seems to work well for all my weldors one of my weldors is 5'-4" and the other is a whopping
    7'-1" man.Now the cairs are adjustable hope this can help.and "good luck"

    Leave a comment:


  • FABRAT
    replied
    Thanks everyone for the info so far. I think that 32" sounds like a good hight i am a pretty short fella so that should work out for me. i am also planning on mounting casters to the legs and having screw down feet to lift it off the casters and make it stationary and level. my next challenge will be designing the mechanism to hold the folding ends up. i will try and take some pics and post them tomorrow (2-9-06) to explain what i am up to here.

    i am also considering a HF compact bender which is on sale for $49.99 on the net right now and adding the scroller attachment...i know that the scroller takes a little work to get opperable but the SO one is out of my range for now but i was wondering if anyone had anything to say about the HF compact bender (pos or neg) any coments would be appreciated.

    Thanks again and weld on ! Nick

    Leave a comment:


  • Richard
    replied
    I think the reciver idea will be a plus you could mount a female pice in the up-right position and the weld a mail piece on a plate then bolt your vise to the plate. just drop you vise in the reciver and their you have a vise on the edge or side of your table
    this way you can move it if you need to.
    also you can get 4 big nuts and bolts, like inch and a half bolts and nuts
    weld the nut to a plat and screw the bolt into the nut, mount the plate on the botom of your leg of your table and then if the floor in your shop,work area is uneaven you can turn the bolts to eather raise or lower the table to compinsate for the floor and then your table will be level (note table will be sitting on bolt heads) and you can level it where ever you put it.
    if you were to mount your table on casters you could make it where your bolts could be screwed down low enuff to rase it to level it.
    I hope all these ideas help you to make a great table
    have fun

    Leave a comment:


  • silverbackman
    replied
    If you're tall go a little higher

    32" is pretty much the standard height, but if you're taller than average, go a little higher, your back will love you. I'm 6'3 and my table is 34". It keeps me from hunching over that little bit. Anyone who's tall will know what I'm talking about. I end up getting a sore back just doing the dishes, but with just a couple of extra inches on my table, I can weld all day. I even custom built my own desk for my office that sits 1" taller than standard. It forces me to sit up proper in my chair, so I don't hunch over my keyboard.
    That's what's great about us fabricators, if it don't work right for us, we can make it!

    Leave a comment:


  • WeldTeach
    replied
    I've found 32-33" to be a pretty common height for tables. We just built a couple 4'x8' tables for our school shop out of 1/4" top plate, 4" channel (1/4" wall) for the frame/crossbraces and 4" x 4" (10 gauge) for the legs, plus 1/4" plate for gussets on the legs. We also welded on HD braking casters so we can move them around the shop. Seem to work well and heavy enough for our use. May someday through another 1/4" plate on top...but not anytime soon...I'll see if I can dig out the digital camera and snap some pics soon..

    Leave a comment:


  • burninbriar
    replied
    My table is also about 32" . This seems to be a good all a round hight. I have worked on 36" tables and found them to be uncomfortable , especially on large projects. Then again, I'm a short person so it all comes down to personal preferance. I drilled and threaded holes for my vice and other equipment so it can be unbolted easily without haveing to hold a nut on the other side.

    Leave a comment:

Working...
X