No announcement yet.

Truck box tie down rails with toolbox

  • Filter
  • Time
  • Show
Clear All
new posts

  • Truck box tie down rails with toolbox

    I just built and installed a pair of tie down rails for my F350 pick up. They were made from 3/16" angle iron with hooks bent from 3/8" round bar. The first 21" back from the cab was fabbed up by notcing out vertical side of the angle iron leaveing 1 3/16" then using the excess cut off a matching section and welded up a box section to set the tool box on. The mounting bolt holes are 1/2" and the hole on the bottom of the box area has a 1 1/8" hole on top to drop the bolt through and put a socket on it.

    Here are some photos,
    Attached Files
    Synchrowave 200

    Victor O/A
    Century 155GS
    Big Window Elite

    Run silent, run deep

  • #2
    Nice job on the rails, thanks for sharing

    What else is there besides welding and riding. Besides that

    Miller Thunderbolt XL 300/200 AC/DC
    Hobart Handler 187
    Dewalt Chop Saw
    4" Air Grinder
    Die Grinder
    Rigid Drill Press
    Kellogg 10hp Air Compressor

    2009 FXDC